Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect FM antenna
•
Connect the supplied antenna to this
device before listening to the radio.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the back
of the main unit.
•
Risk of electric shock! Before you plug the AC power
adaptor, make sure that the adaptor plug converter is
fixed securely. When you unplug the AC power adaptor,
always pull the plug, never the cord.
•
Before you connect the AC power adaptor, make sure
that you have completed all the other connections.
Prepare the remote control
Caution
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Set clock
1
In standby mode, CLOCK on the remote
control for 3 seconds.
» The [24H] or [12H] hour format is
displayed.
2
to select the [24H] or
Press
/
[12H] hour format.
3
Press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
EN
7
Advertisement
Table of Contents
