Table of Contents
Advertisement
5-10Patient Step
ILLUSTRATION 2-2
PATIENT STEP
5-11Foot Rest
om 5184516-100 Rev. 5
The patient step
(ILLUSTRATION
and off the table. The step is attached to the underside of the table body to the
right of the front support. Table angulation is prevented when the step is pulled
out. The white button must be pressed to push the step in.
INJURY COULD OCCUR IF PATIENT STEP IS NOT FULLY OUT.
VERIFY PATIENT STEP IS FULLY ENGAGED AND ASSIST THE
PATIENT ON AND OFF THE TABLE.
TO PREVENT IMPROPER ATTACHMENT AND POTENTIAL INJURY TO
PATIENT, USE THIS FOOTREST ONLY ON THE TABLE FOR WHICH IT
HAS BEEN ADJUSTED.
Installing the foot rest at the set of slots closest to the end of the
tabletop provides easier patient boarding.
The foot rest is engaged on the table top in the same manner as shown for the
shoulder rest on
ILLUSTRATION
patient.
To attach:
1. Push on the safety latches with the thumbs and spread the handles.
2. Place the foot rest on the top adjacent to a set of slots and release the han-
dles.
3. Slide the foot rest until both handles snap into place.
2-2) provides patient convenience getting on
2-3, and is designed to support a 300 lb (136 kg)
2-24
Advertisement
Table of Contents
