AEG FSK52917Z User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK52917Z
  6. User manual

AEG FSK52917Z User Manual

Hide thumbs Also See for FSK52917Z:
Table of Contents

Advertisement

Quick Links

Download this manual
FSK52917Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK52917Z

Summary of Contents for AEG FSK52917Z

  • Page 1 FSK52917Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.

  • Page 6: Product Description

    2.7 Disposal displays, pressure switches,...

  • Page 7: Control Panel

    ENGLISH Upper basket Cutlery drawer 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated. displayed on the floor below the appliance door. When AirDry is activated • When the programme starts, a red during the drying phase, the light comes on and stays on for the projection on the floor may...

  • Page 8: Programme Selection

    4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use".
  • Page 9 ENGLISH 5.4 Programmes overview Pro‐ Type of load Degree of soil Programme phases EXTRAS gramme Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...

  • Page 10: Basic Settings

    Water (l) Energy (kWh) Duration (min) Programme 10.4 - 12.7 0.83 - 0.96 1h 30min 10.3 - 12.6 0.96 - 1.09 2h 40min 9.8 - 12.0 1.05 - 1.18 10.5 0.935 /0.950 /240 AUTO Sense 8.7 - 12.0 0.75 - 1.18...
  • Page 11 ENGLISH Number Settings Values Description Latest pro‐ Enable or disable the automatic selection gramme selec‐ Off (default) of the most recently used programme and tion options. 1) For more details, refer to the information provided in this chapter. 6.1 The water softener You can change the basic settings in setting mode.
  • Page 12 Regardless of the type of detergent in the same cycle or at the beginning of used, set the proper water hardness the next programme. This activity level to keep the salt refill indicator increases the total water consumption of active.
  • Page 13 ENGLISH 6.3 End sound 6.5 Key tones You can activate an acoustic signal that The buttons on the control panel make a sounds when the programme is click sound when you press them. You completed. can deactivate this sound. Acoustic signals sound also 6.6 Latest programme selection when a malfunction of the appliance occurs.

  • Page 14: Before First Use

    The lights related to the Previous, OK • The current setting value flashes. and Next are on. 3. Press Previous or Next to change the value. How to change a setting 4. Press OK to confirm the setting. • The new setting is saved.

  • Page 15: Daily Use

    ENGLISH 6. Turn the cap of the salt container CAUTION! clockwise to close the salt container. Only use rinse aid designed CAUTION! specifically for dishwashers. Water and salt can come out 1. Press the release button (D) to open of the salt container when the lid (C).
  • Page 16 8.2 How to select and start a 8.4 How to start the AUTO programme using MY TIME Sense program selection bar 1. Press 1. Slide your finger across MY TIME • The light related to the button is selection bar to choose a suitable programme.

  • Page 17: Hints And Tips

    ENGLISH 8.9 The Auto Off function The appliance returns to the programme selection. This function saves energy by switching Make sure that there is the appliance off when it is not operating. detergent in the detergent The function comes into operation dispenser before you start a automatically: new programme.
  • Page 18 9.4 Before starting a products can cause damage to the appliance. programme • In areas with hard and very hard water, we recommend to use basic Before you start the selected dishwasher detergent (powder, gel, programme, make sure that: tablets containing no additional •...

  • Page 19: Care And Cleaning

    ENGLISH After the programme is completed, water can still remain on the inside surfaces of the appliance. 10. CARE AND CLEANING When the programme is complete, the WARNING! indicator is off. Before any maintenance other than running the 10.2 Internal cleaning programme Machine Care, deactivate the appliance and •...
  • Page 20 10.5 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A).
  • Page 21 ENGLISH 10.6 Cleaning the lower spray 10.7 Cleaning the ceiling spray We recommend to clean the lower spray We recommend to clean the ceiling spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes. clogging the holes.

  • Page 22: Troubleshooting

    5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clogged. The display shows i20. •...
  • Page 24 Problem and alarm code Possible cause and solution Small leak from the appli‐ • The appliance is not levelled. Loosen or tighten the ad‐ ance door. justable feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
  • Page 25 ENGLISH 11.2 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.

  • Page 26: Technical Information

    Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator.
  • Page 27 ENGLISH 12.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database and product number that you can find on the rating plate of the appliance. Refer to The QR code on the energy label the chapter "Product description".
  • Page 28 www.aeg.com/shop...

Table of Contents