Page 1
Ceiling-mounted ventilation system LR96CBS20, LR26CBS20, LR96CBS25 User manual and assembly instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
en Safety The appliance can only be used safely if it is Table of contents correctly installed according to the safety in- structions. The installer is responsible for en- Safety ................ 2 suring that the appliance works perfectly at its Preventing material damage ........
Page 3
Safety en installed and discharge the exhaust gases ▶ Do not install the appliance near a into the open through an exhaust gas sys- solid fuel heating appliance (e.g. wood- tem (e.g. a chimney). With the extractor or coal-burning) unless the heating ap- hood switched on, air is extracted from pliance has a sealed, non-removable the kitchen and the adjacent rooms.
en Preventing material damage ¡ The filter cover may swing out. ▶ If the appliance or the power cord is damaged, immediately unplug the ▶ Open the filter cover slowly. power cord or switch off the fuse in the ▶ Take hold of the filter cover after open- fuse box.
Environmental protection and saving energy en ¡ Incorrect cleaning damages the surfaces. Switch the appliance off when you are not using it. Follow the cleaning instructions. ▶ The appliance does not consume any energy. Do not use harsh or abrasive detergents. ▶...
en Before using for the first time Tip: Align the remote control as precisely as possible Before using for the first time to the infrared receiver for the LED display. Configure the settings for initial start-up. Clean the ap- pliance and accessories. Setting an operating mode Your appliance is set to air extraction mode by default.
Page 7
Basic operation en Switching on intensive mode Sensor control If particularly strong odours or vapours develop, you In automatic mode, a sensor in the appliance detects can use intensive mode. the intensity of the cooking and roasting fumes. De- pending on the setting of the sensor sensitivity, the op- Press ...
en Hob-based hood control You have the following options for connecting the Switching on the lighting appliances with each other: Press to switch on the lighting. ¡ Connecting the appliance via the Home Connect ▶ app. If both appliances are Home Connect-compat- Note: Colour temperature settings are available in the ible, they can be connected using the Home Con- Home Connect app provided the appliance has this nect app.
Page 9
Home Connect en ¡ Automatically connecting appliance to WLAN home On your mobile device, follow the instructions for automatic network login. network (Wi-Fi) → Page 9 ¡ Connecting appliance to WLAN home network (Wi- a The login process is complete when LED 7 stops Fi) manually → Page 9 flashing and remains continuously lit.
Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.siemens-home.bsh-group.com among Data protection the additional documents on the product page for your Please see the information on data protection.
Page 11
Cleaning and servicing en Press the lock on the filter cover. Cleaning painted surfaces Observe the information regarding the cleaning agents. → "Cleaning products", Page 10 Clean using a sponge cloth and hot soapy water in the direction of the finish. Dry with a soft cloth. Cleaning plastic Observe the information regarding the cleaning agents.
Page 12
en Cleaning and servicing Fold the grease filters upwards and engage the Cleaning grease filters in the locks. dishwasher Make sure that the locks engage. The grease filters filter the grease from the cooking va- Fold the filter cover upwards to close it. pour.
Troubleshooting en Insert the new batteries (3 V CR 2032). Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out ▶...
en Accessories Function-relevant genuine spare parts according to the Unplug the appliance from the mains. corresponding Ecodesign Order can be obtained from Cut through the power cord. Customer Service for a period of at least 10 years from Dispose of the appliance in an environmentally the date on which your appliance was placed on the friendly manner.
Page 15
Installation instructions en Dimensions You will find the dimensions of the appliance here Safety clearances Comply with the safety clearances for the appliance. Secure installation Follow these safety instructions when installing the ap- pliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g.
Page 16
en Installation instructions In any case, consult your responsible chimney Take hold of the filter cover after opening until it ▶ ▶ sweep. They are able to assess the house's entire no longer swings out. ventilation setup and will suggest the suitable ventil- Close the filter cover slowly.
Page 17
Installation instructions en ¡ An exhaust air pipe that is made of non-combustible ¡ The appliance corresponds to protection class 1. material. Therefore, only use the appliance with a protective ¡ To prevent condensate from returning, fit the ex- earth connection. haust air pipe from the appliance with a 1°...
Page 18
en Installation instructions Screw the flat duct connection onto the fan group. Note: To ensure that the appliance is not damaged, do not overtighten the screws. Carefully tighten screws in succession until the ap- pliance is flush-mounted on the ceiling. Connecting the appliance Undo the screws on the top frame assembly using a screwdriver and remove the top frame assembly.
Page 19
Installation instructions en Loosen the screws on the side covers and remove Push the fan box to the other side and connect the the covers. pipework. Undo the opposite screws to loosen the fan box. Position the fan box in the centre and screw it firmly in place.
Page 20
en Installation instructions Store the remaining cable in the gap. Insert the side covers and screw them firmly in place. Tighten the screw on the metal hook so that it is firmly in place. Connect the cable. Turning the air outlet clockwise Ausgehend vom Auslieferungszustand, den Lüfter- kasten im Uhrzeigersinn drehen, sodass der Luftauslass nach rechts zeigt.
Page 21
Installation instructions en Fit the cover frame and screw it firmly in place. Mount the filter cover on the designated screws and push it backwards/forwards depending on the key hole opening into the narrow section. Fitting the filter cover WARNING ‒ Risk of injury! ¡...
Page 22
en Installation instructions Insert the cable plug and close the cable duct's lid. Undo the screws on the top frame assembly using a screwdriver and remove the top frame assembly. Insert the grease filters. To avoid causing damage, do not bend the grease filters.
Page 23
Installation instructions en Press together the cable duct at the sides and re- Push the fan box to the side and release the pipe- move it. work. Disconnect the cable at the appropriate point. Push the fan box to the other side and pull out the mains plug.
Page 24
en Installation instructions Loosen the mounting brackets on the appliance us- ing a screwdriver. Slowly take the appliance out of the cutout.
Page 28
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001482615* 9001482615 (000303)