Pre-Maintenance
Procedures
Preparing for Maintenance
1.
Park the machine on a level surface.
2.
Lower the cutting units.
3.
Engage the parking brake.
4.
Shut off the engine, and remove the key.
5.
Wait for all parts to stop moving.
Removing the Battery
Cover
Remove the 2 knobs that secure the battery cover to
the machine, and remove the cover
Figure 53
1. Knob
Opening the Hood
1.
Release the latches at the left side and right side
of the hood
(Figure
Figure 54
1. Hood latch
2.
Rotate the hood up and back
(Figure
52).
2. Battery cover
53).
(Figure
54).
g336164
g336542
44
Figure 55
g336543