USING YOUR ELECTRIC INSET FIRE
Manual Operation
The appliance can be operated by pressing the buttons on the control panel
under the canopy.
•
First, press the On/Off button on the left of the control panel once to turn on
the appliance. The appliance will beep once to indicate that the power is ON.
Press the I/O button on the right of the control panel to turn on the appliance
and fire effect. A red light will show to indicate that the appliance is on.
•
Press the I/O button for 3 seconds,this will operate the dimmer mode, hold
the button down until the desired brightness is obtained.
•
Press the 1000W button once for the low heat setting and press twice to
switch off the heat setting.
•
Press the 2000W button once for the high heat setting and press twice to
switch off the heat setting.
9