Table of Contents
Advertisement
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t For the combinations and restrictions of the settings, refer to "Recording function that cannot be used simultaneously" (page 198).
[REC FUNCTION]
[REC MODE]
Selects the recording mode.
[NORMAL]
[INTERVAL]
(Factory setting: [NORMAL])
@
NOTE
t For the combinations and restrictions of the settings, refer to "Recording function that cannot be used simultaneously" (page 198).
[REC MODE HOLD]
Selects whether to hold [REC MODE] settings.
[ON]
[OFF]
(Factory setting: [OFF])
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
f [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC/UB]
[TC PRESET]
Sets the default value of the time code to record.
Hour
Minute
Second
Frame
(Factory setting: [00]) (each item)
[UB PRESET]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
f [00]...[FF]
(Factory setting: [00])
[FREE/REC RUN]
Sets the operation mode to advance the time code generator.
[FREE RUN]
[REC RUN]
(Factory setting: [REC RUN])
Chapter 4 Operation — Menu settings
Performs the pre-recording.
The pre-recording time is as follows.
f When [FILE FORMAT] is set to [P2]: Approximately 3 seconds
f When [FILE FORMAT] is set to [MOV], and [REC FORMAT] is set to [2160-29.97p/422ALL-I 400M], [2160-25.00p/422ALL-I
400M], or [2160-23.98p/422ALL-I 400M]: Approximately 3 seconds
f When [FILE FORMAT] is set to [MOV], and [REC FORMAT] is set to [2160-59.94p/HEVC LongGOP 200M], [2160-59.94p/
HEVC LongGOP 100M], [2160-59.94p/420LongGOP 150M], [2160-50.00p/HEVC LongGOP 200M], [2160-50.00p/HEVC
LongGOP 100M], [2160-50.00p/420LongGOP 150M], [2160-29.97p/HEVC LongGOP 150M], [2160-29.97p/422LongGOP
150M], [2160-29.97p/420LongGOP 100M], [2160-25.00p/HEVC LongGOP 150M], [2160-25.00p/422LongGOP 150M],
[2160-25.00p/420LongGOP100M], [2160-23.98p/HEVC LongGOP 150M], [2160-23.98p/422LongGOP 150M], or
[2160-23.98p/420LongGOP 100M]: Approximately 5 seconds
f When set to other than above: Approximately 10 seconds
Does not perform the pre-recording.
Performs the standard recording.
Performs the interval recording. (A function to repeatedly perform the operation of one frame recording in set time interval.)
Holds the settings.
Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.
[00]...[23]
[00]...[59]
[00]...[59]
[00] ... [23] (when [23.98p])
[00] ... [24] (when [50.00i], [50.00p], or [25.00p] is set)
[00] ... [29] (when [59.94i], [59.94p], or [29.97p] is set)
Advances regardless of the operation mode.
Advances only while recording.
– 91 –
Advertisement
Table of Contents
