Setting Up Fax Features - Epson Artisan 800 Basic Manual

2. To use a telephone or answering machine, you need a second phone cable.
Connect one end of the cable to the telephone or answering machine, and
connect the other end to the
When you receive a call, if the other party is a fax and you pick up the phone or
the answering machine answers, the Artisan 800 Series automatically begins
receiving the transmission. If the other party is a caller, the phone can be used as
normal or a message can be left on the answering machine.
Note:
Your phone or answering machine must be connected to the EXT. port (not to a wall
jack) for the Artisan 800 Series to detect incoming fax calls properly. It's a good idea to
set the Artisan 800 Series to pick up calls after your answering machine; to adjust the
number of rings after which the Artisan 800 Series answers, press the Home button
and select Setup, select Fax Setting, select Communication, and select Rings to
Answer.

Setting Up Fax Features

Before sending or receiving faxes, you may want to create a fax header, select your
fax preferences, and set up a speed dial list of frequently used fax numbers.
■
"Entering Fax Header Information" on page 20
■
"Select Scan and Print Settings" on page 21
■
"Setting Up a Speed Dial List" on page 22
Note:
To change other settings or print fax reports, see the on-screen Epson Information
Center.
port on the back of the Artisan 800 Series.
EXT.
Setting Up Fax Features
19