Troubleshooting - Frigidaire FEC3K5GA00 Use & Care Manual

Let us help you troubleshoot your concern! This section will help you with common
issues. If you need us, visit our website, chat with an agent, or call us. We may be able to
help you avoid a service visit. If you do need service, we can get that started for you!
Problem
There is no
airflow.
The unit does not
cool at all.
The unit does not
sufficiently cool.
Water is coming
out of the vents.
Possible Causes
• The power cord is not
plugged in.
• The water tank is not
locked into the unit.
• The cooling function
was not activated.
• The pump is
defective.
• The cooling pad is not
sufficiently saturated
with water.
• The cooling pad may
be clogged with
debris.

TROUBLESHOOTING

Solution
• Check to make sure the
plug is plugged into an
outlet. The unit should
beep twice once the
power supply is
connected.
• Make sure the water tank is
locked into the back of the
unit.
• Activate the cooling
function.
• Contact customer service
if there is an issue with the
water pump.
• If speed 3 is selected when
in cooling mode, the unit
will automatically revert to
speed 2 for 5 minutes to
allow the pad to be fully
soaked. The unit will
automatically turn to
speed 3 when the pad is
soaked.
• Clean the cooling pad by
rinsing it in water and
allowing it to thoroughly
dry. If the problem
persists, contact customer
service.
11