Pressing Off The Casing; Fig. 47: Press Off The Casing - ABB HT608319 Operation Manual

Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.8 Pressing off the casing
9.8

Pressing off the casing

CAUTION
Axial force of the press-off tool
Using the press-off tool (90042), a high level of axial force can be generated.
If the casing is pressed off with too much force on one side, the rotor can be
damaged.
Use the tool on both sides in alternation and make sure not to press off
u
too hard on either side.
Fig. 47: Press off the casing
© Copyright 2021 ABB. All rights reserved. HZTL4031_EN Rev.N March 2021