Connecting The Print Adapter - Epson Stylus C60 User Manual

Connecting the Print Adapter

Follow these steps to connect the print adapter to your printer:
1. Make sure that the printer is turned off.
2. Plug the print adapter into the printer's parallel port, as shown.
3. Turn on the printer.
4. Connect the power supply to the print adapter, as shown. Then plug the
power supply into an electrical outlet.
The green light on the print adapter flashes for a few seconds and then goes out.
If the green light flashes continuously in a regular pattern, unplug the power
supply and plug it in again. If the problem persists, contact EPSON.
Connection light (green)
Activity light (yellow)
4
Parallel port
Power supply
Test button