Husqvarna QHIO660P User Manual page 29

Table of Contents

Advertisement

Available languages

Available languages

• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
5.3 Using the cooking zones
CAUTION!
Do not place hot cookware
on the control panel. There
is a risk of damage to the
electronic parts.
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hours
Once the pot is detected, the heat setting
0 comes on.
You can cook with large cookware
placed on two cooking zones at the
same time. The cookware must cover the
centres of both zones. If the cookware is
located between the two centres, Bridge
function will not be activated.
5.4 Heat setting
Touch the control bar at the desired heat
setting or move your finger along the
control bar to set or change the heat
setting for a cooking zone.
Once you place a pot on the cooking
zone and set the heat setting, it remains
the same for 50 seconds after you
remove the pot. The control bar blinks for
the second half of that time. If you place
the pot on the cooking zone again within
this time, the heat setting reactivates.
Otherwise the cooking zone deactivates.
5.5 Bridge
The function operates when
the pot covers the centres of
the two zones.
This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch
. The cooking zones operate
independently.
5.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
ENGLISH
29
/
. To set or
/

Advertisement

Table of Contents
loading

Table of Contents