Signage Display; Setting; Wi-Fi; Ethernet - Philips 32BDL4050D Manual

32BDL4050D
5.

signage display

5.1.

Setting

Setting main items:

(1) Wi-Fi

(2) Ethernet

(3) Signage Display
(4) System Tools
(5) Storage
(6) Apps
(7) Date & time
(8) Developer options
(9) About
5.2. Wi-Fi
Via Enable/Disable to control Wi-Fi On/OFF. After Enable, the screen will
list all available WiFi AP.
Note :
Ethernet will be disable automatically if Wifi turn on and connect to
network .
5.3. Ethernet
Via Enable/Disable to control Ethernet On/Off.After enable Ethernet, it will
display:
(1) Connect Type (available type is DHCP/Static IP)
A. DHCP
B. Static IP
C. IP Address
D. Netmask
E. DNS Address
F. Gateway Address
(2) Mac Address
Note:
WiFi will be disable automatically if Ethernet turn on and connect to
network.

5.3.1. DHCP

DHCP mode:
(1) Cannot modify IP Address, Netmask, DNS Address and Gateway..
(2) (If connect successfully, it will display current network configuration.

5.3.2. Static IP

Under StaticIP, User can manually input IP Address, Netmask, DNS Address
and Gateway.
Note:
IP address, netmask, DNS address and gateway address input limitation
(1)Format:
I. number 0-9
II. decimal point ". "
28