Safety Approvals - Epson Stylus Photo 1200 Manual

EPSON Stylus Photo 1200
Environmental
Temperature
Operation 50 to 95 °F (10 to 35 °C)
Storage* – 4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Transit* –4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity
Operation 20 to 80% RH
Storage* 5 to 85% RH (without condensation)
* Stored in shipping container
Electrical
Specification 120V model
Input voltage range 99V to 132V
Rated frequency range 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Rated current 0.4A
Power consumption Approx. 18 W (ISO 10561 Letter Pattern)
Approx. 5 W in standby mode
* Also designed for IT power systems with Phase to Phase voltage
220–240V

Safety Approvals

Safety standards UL 1950, CSA 22.2 No. 950
EMC FCC part 15 subpart B class B
Interfaces
Parallel interface
Forward channel
Specification Description
Data format 8-bit parallel, IEEE-1284 compatibility mode
Synchronization STROBE pulse
Handshake timing BUSY and ACKNLG signals
Signal level TTL compatible
Connector 57-30360 Amphenol connector or equivalent
4 - EPSON Stylus Photo 1200
240V model*
198V to 264V
0.2A
3/99
Reverse channel
Specification
Transmission mode
Adaptable connector
Synchronization
Handshaking
Signal level
Data transmission timing
Serial interface
Specification Description
Standard Based on RS-423
Synchronization Synchronous
Bit rate Approximately 1.8 Mbps
Handshaking X-ON/X-OFF and DTR protocol
Word format Data bit: 8 bits
Parity bit: None
Start bit: 1 bit
Stop bit: 1 bit
Connector 8-pin mini-DIN
Recommended cable ImageWriter II serial cable (preferably Belkin
brand)
USB interface
Specification Description
Standard Based on Universal Serial Bus Specifications
Revision 1.0, Universal Serial Bus Device Class
Definition for Printing Devices Version 1.0
Bit rate 12 Mbps (full speed device)
Data encoding NRZI
Adaptable USB Series B
connector
Recommended 6.5 feet (2 meters) or less
cable length
Description
IEEE-1284 Nibble mode
57-30360 Amphenol connector or
equivalent
Refer to the IEEE-1284 specification
Refer to the IEEE-1284 specification
IEEE-1284 Level 1 device
Refer to the IEEE-1284 specification