Install The Printer Software - Epson Stylus Photo 1280 Start Here Manual

7
7
Install the Printer
Install the Printer
Software
Software
Windows ®
1
Make sure your printer is connected and turned off. Then turn on your computer and wait
for Windows to start up.
2
Press the power button to turn on your printer.
If you see a New Hardware screen, click Cancel.
3
Insert the printer software CD-ROM in your CD-ROM
or DVD drive.
4
When you see the Software License Agreement,
read it and click Agree.
5
Click Install Printer Driver and wait while the printer
software is installed.
NOTE: If you see a screen about turning on the
printer, make sure the printer is connected and
turned on and wait for the computer to detect
the printer port.
6
At the end of the driver installation, click OK.
7
Follow the on-screen instructions to install the
ICC Color Profiles. Click Finish when done.
8
Click Install GretagMacbeth Software to try the
program and install it if desired. When you finish,
click Back.
9
Select Install Reference Guide to install the
printer manual on your desktop.
10
Select Share Photos Online at Epson PhotoCenter, then click Add Icon to place a link to
the web site on your desktop.
11
Click Exit. Register your printer with Epson
keep it in case you need to reinstall any software later.
Macintosh ®
1
Make sure your printer is connected and turned on. Then turn on your Macintosh.
2
Insert your printer software CD-ROM in your CD-ROM or DVD drive.
3
Double-click the
4
Read the License Agreement and click Agree.
5
Click Install Printer Driver and follow the
on-screen instructions. (You may need
to enter your administrator password.)
6
Click Install GretagMacbeth Software to try the
program and install it if desired. When you finish,
click Back.
7
Select Install Reference Guide to install the
printer manual on your desktop.
8
Select Share Photos Online at Epson PhotoCenter,
then click Add Icon to place a link to the web site on
your desktop.
9
Click Exit. Register your printer with Epson as instructed. Remove the CD-ROM and keep it
in case you need to reinstall any software later.
10
Now add the printer to the Printer Setup Utility or Print Center as described in the
next section.
Epson icon in the window that opens.
® as instructed. Remove the CD-ROM and