Page 1: Table Of Contents
Connect the Printer to Your Computer Load Paper Install the Software Register Your Printer EPSON Digital PhotoLab Navigating Through EPSON Digital PhotoLab What Do You Get with EPSON Digital PhotoLab? Print a Page in Windows Print a Page in Macintosh Problems? Need Help?
Page 2: Welcome
Everything You Need for Photo-Quality Prints Prints The EPSON Stylus Photo 700 CD-ROM includes all the software you need for photo-quality output: your printer software and EPSON Digital PhotoLab What Is Your Printer Software? To print, you need some printer software (also known as a printer driver) to tell the printer how to print.
Page 3: Printer Setup
(6 to 10 feet long). To connect to a Macintosh, you’ll need an Apple Place the printer flat on a stable desk near a grounded outlet. Leave plenty of room in back for the cables and enough room in front for opening the output tray.
Page 4: Attach The Paper Support
2 Attach the Paper Support Insert the paper support in the top slot on the back of the printer. 3 Install the Ink Cartridges 1. Plug the power cord into a grounded outlet. 2. Make sure the power is off (the power light is off).
Page 5 Caution: Always use the an external switch—such as a power strip—to turn off the printer. 5. Lift the two ink cartridge clamps. 6. Remove the ink cartridges from their foil packages. Then remove only the yellow part of the tape seal on the top of each cartridge.
Page 6: Connect The Printer To Your Computer
7. Insert the ink cartridges into their holders. Be sure the labels are face up and the arrows point toward the back of the printer. The black ink cartridge goes on the left and the color ink cartridge goes on the right.
Page 7: Load Paper
Connecting to a Macintosh 1. Turn off the printer and your Macintosh. 2. Connect the cable to the serial connector on the back of the printer. 3. Connect the other end of the cable to either modem port or the your Macintosh.
Page 8: Install The Software
Follow the steps in Chapter 6 of your User’s Guide. 6 Install the Software Your EPSON Stylus Photo 700 CD-ROM includes printer software (also called a printer driver) and EPSON Digital PhotoLab for both Windows and Macintosh. You must install the printer software for the printer to work correctly.
Page 9 2. Turn on your computer, but leave your printer turned off. Make sure Windows 95 is running (you should see the Windows Desktop icons). 3. Insert the EPSON Stylus Photo 700 CD-ROM or diskette 1 if you’re using diskettes. If Windows 95 launches the installation program automatically, you see the EPSON Setup CD window.
Page 10 5. Follow the instructions on screen to install the software. EPSON Digital PhotoLab is installed first. Click Finish when that installation is complete. At the next screen, click OK to install your printer software and Status Monitor. (There may be a brief pause before the installation begins; if you are installing the software from diskettes, only the printer software and Status Monitor are installed.)
Page 11 1. Make sure your printer is connected to the computer and your computer is turned on. 2. Make sure Windows Program Manager is running. Exit any open applications. 3. Insert the EPSON Stylus Photo 700 CD-ROM or diskette 1 if you’re using diskettes. 4. From the Program Manager File menu, select Run.
Page 12 Your printer software icons and the EPSON Digital PhotoLab icon appear in the EPSON program group and the EPSON Stylus Photo 700 is set as your default Windows printer. To launch EPSON Digital PhotoLab, click this icon EPSON program group.
Page 13 3. Insert the EPSON Stylus Photo 700 CD-ROM or diskette 1 if you’re using diskettes. If Windows NT 4.0 launches the installation program automatically, you see the EPSON Setup CD window. Go to step 4. If it doesn’t launch automatically, click Start, select Run, and type D:\Setup700 (substitute the correct drive letter).
Page 14 2. Turn on your Macintosh and turn off your virus protection programs, as necessary. 3. Once your Macintosh is fully started, turn on your printer. 4. Insert the EPSON Stylus Photo 700 CD-ROM or Disk 1 if you’re using diskettes. Double-click the EPSON CD-ROM or diskette icon if it doesn’t open automatically.
Page 15 Macintosh. Then you can continue with the EPSON Digital PhotoLab installation. 7. Double-click the EPSON Digital PhotoLab Install icon and follow the instructions on screen to install it. An alias appears on your desktop and EPSON Digital PhotoLab automatically launches.
Page 16: Register Your Printer
T-shirts, banners, greeting cards, and other items you might never have thought of! Plus, you can get helpful information on EPSON products and supplies. Be sure to run the EPSON Digital PhotoLab software suite right away to install your creative software and check out the great projects. Here’s how...
Page 17: Navigating Through Epson Digital Photolab
Internet service provider offer, learn how to navigate the net, and find photo-savvy web sites. Also includes the Kodak SCOOP ON OTHER EPSON PRODUCTS. Find out about EPSON digital cameras, scanners, and the wide variety of EPSON media. HOW TO GET HELP. If you need help with any of these programs, see this section for information on contacting the software manufacturers.
Page 18 Many of the submenus have tabbed sections. Select a section by clicking its tab. Click DONE to return to the submenu screen. (You cannot click EPSON or EXIT when you’re in a tabbed section.) Click to open...
Page 19: What Do You Get With Epson Digital Photolab
What Do You Get with EPSON Digital PhotoLab? Select INSTALL ADDITIONAL PROGRAMS to install these great programs on your system: ® ® Adobe PhotoDeluxe EPSON Photo Sheet ™ Extensis ™ Portfolio ™ Pictureworks ™ Spin ™ Panorama ® DíAMAR Learning to See Creatively LE Follow the instructions on screen to install the programs.
Page 20: Print A Page In Windows
In Windows NT 4.0, click Start, select Settings, and then choose Printers. Right-click the EPSON Stylus Photo 700 icon and click Properties. On the Scheduling tab, select Print directly to the printer and click OK.
Page 21 4. Adobe PhotoDeluxe contains a wide selection of sample images. Click Open File and highlight the file name for the image you want to print (you may need to navigate to the folder with your file) and click Open. 5. Click File in the menu bar and select Print from the list that appears.
Page 22 7. You see the Page Setup dialog box. Click the Properties button. 8. You see the dialog box for your printer software. If necessary, click the Main tab to display the basic settings shown below. Main tab This setting gives good...
Page 23 13. Click OK to start printing. If you installed the Status Monitor, the Progress Meter will appear and show the progress of your print job. For more information, see Chapter 4 in your User’s Guide. Soon you’ll see the amazing photographic detail your EPSON Stylus Photo 700 printer can produce.
Page 24: Print A Page In Macintosh
Print a Page in Macintosh Print a Page in Macintosh Now that you’ve set up your printer and installed the software, you’re ready to print. Follow the steps here to use Adobe PhotoDeluxe to print a color image. (If you haven’t installed Adobe PhotoDeluxe from the CD-ROM yet, go ahead and install it...
Page 25 (you may need to navigate to the folder with your file) and click Open. 6. Now open your printer software to get ready to print the image. Click File in the menu bar and select Page Setup from the list that appears.
Page 26 Make sure Media Type is set to Plain Paper. (If you load a different type of paper, you’ll need to select a corresponding Media Type.) 10. Click Print to start printing. If you have background printing turned on, EPSON Monitor3 opens in the background to monitor your print job. See Chapter 4 of your User’s Guide for more details about Monitor3.
Page 28: Problems? Need Help
Make sure you’ve closed all other applications, including any screen savers. Then try installing the software again. If you need help with the creative software in EPSON Digital PhotoLab . . . For assistance using the programs you installed with EPSON Digital PhotoLab, contact the company that produced the software.
Page 29 If your printer makes noise when you turn it on or after it has been sitting for a while . . . Your printer is performing routine maintenance. If you can’t see the EPSON Progress Meter or Status Monitor 2 in Windows 95 . . . Make sure you installed the Status Monitor. If you didn’t, you can install the Status Monitor by reinstalling the printer software and making sure you choose to install the Status Monitor.
Page 30 To make printer driver software installation diskettes from the CD-ROM using another computer, see the section below for your operating system. Note: You need a CD-ROM drive to install and use EPSON Digital PhotoLab; it is not available on diskettes.
Page 31 4. In Windows 95 or Windows NT 4.0, the installer program starts automatically and you see the EPSON Setup CD window. (If it doesn’t start, click Start, select Run, and type D:\Setup700 [substitute the correct drive letter]; then click OK.) In Windows 3.1, select Run from the File menu.
Page 32 EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON FaxAdvice, EPSON Digital PhotoLab, and EPSON Photo Sheet are trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Page 33: How To Order Epson Ink And Paper
How to Order EPSON Ink and Paper To order EPSON ink cartridges, paper and other printing media, contact your dealer or call EPSON Accessories at (800) 873-7766 (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. Here are the EPSON ink cartridges and media you can order:...

Epson Stylus Photo 700 User Manual

Quick Links

Related Manuals for Epson Stylus Photo 700

Summary of Contents for Epson Stylus Photo 700

Table of Contents