Download Print this page

Epson Stylus Photo R800 Start Here Manual

Epson stylus photo r800: quick start
Hide thumbs Also See for Stylus Photo R800:

Advertisement

Quick Links

1
1
Unpack
Unpack
1
Remove everything from the box.
Printer
See your User's Guide for
instructions on installing
and using these parts.
2
Remove all the blue tape and packing materials inside and around the printer.
3
Open the paper support and pull up its extension.
Epson Stylus
Start
Start
Here
Here
Ink cartridges
(8 individual)
Roll paper
holders
®
Photo R800
'
User
s Guide
Mini-CD
ring
CD tray
CPD-17408R1
4101374-00
XXX
Printer Software
CD-ROM
Print position
check disk

Advertisement

loading

Summary of Contents for Epson Stylus Photo R800

  • Page 1: Start Here

    Printer See your User’s Guide for instructions on installing and using these parts. Remove all the blue tape and packing materials inside and around the printer. Open the paper support and pull up its extension. ® Photo R800 Ink cartridges (8 individual) ’...
  • Page 2: Connect The Printer

    Connect the Printer Connect the Printer Connection cables are not included with your printer. You need only one of the following cables. NOTE: Do not connect both cables. • USB cable (preferably a Hi-Speed USB 2.0 cable for Windows •...
  • Page 3: Install Ink Cartridges

    Then push each one down until it clicks into place. Close the cartridge cover and press it down until it clicks into place. Close the printer cover, then press the The green power and red printer charges ink for about 2 CAUTION: Don’t turn off the printer...
  • Page 4: Load Paper

    DON’T CLICK ANY BUTTONS ON THIS SCREEN YET. NOTE: If a screen like this doesn’t appear, make sure your printer is turned on and connected. Put the Epson CD-ROM in your CD-ROM or DVD-ROM drive and wait a few seconds for the CD-ROM to be recognized.
  • Page 5: Installing Optional Software

    When you’re finished, click Back to return to the Options Menu. Click Install Reference Guide to install your on-screen printer manual. Click Exit at the Options Menu. Register your printer with Epson as instructed. Remove the CD-ROM and keep it in case you need to reinstall any software later.
  • Page 6 When you’re finished, click Back to return to the Install Menu. Click Install Reference Guide to install your on-screen printer manual. Click Exit at the Install Menu. Register your printer with Epson as instructed. Remove the CD-ROM and keep it in case you need to reinstall any software later.