Epson Stylus Pro 3880 User Manual page 125

Message
BORDERLESS
ERROR
PRESS THE DOWN
BUTTON.
LOAD THE CORRECT
SIZE PAPER
CANNOT OPEN
COVER
IS THERE ANYTHING
ON THE PRINTER?
PRESS THE UP
BUTTON
CARRIAGE LOCKED
RELEASE THE
CARRIAGE LOCK
CLEANING ERROR
PRESS THE
CANCEL/RESET
BUTTON
CLEANING ERROR
PRESS THE DOWN
BUTTON AND
REMOVE THICK
PAPER
COMMAND ERROR
CHECK DRIVER
SETTINGS
FRONT FEED SLOT
OPEN
CLOSE THE FRONT
MANUAL FEED SLOT
Explanation
The installed paper is not
supported for borderless
printing or the PAPER SIZE
CHECK setting is off.
Something may have been
placed on top of the printer
(ink cover).
The print head is locked.
The nozzles are still
clogged.
Print head cleaning cannot
be started because thick
paper is loaded.
Damaged data was sent to
the printer or the data has
an incorrect command.
The installed printer driver
is not correct for the printer.
The front manual feed slot
is open during operation.
Response
Press the d Paper feed button, and then load a different
size media. See "Choosing Paper Options" on page 83
for Windows, or "Choosing Page Setup Options" on
page 60 for Macintosh. Also, select ON for PAPER SIZE
CHECK in the printer's menu system.
Remove whatever has been placed on the printer (ink
cover). Press the
u
ink cover.
Remove all protective materials from the print head to
release it.
Press the + Cancel/Reset button, then run the Head
Cleaning utility. See "Checking and Cleaning the Print
Head" on page 100.
Remove the thick paper.
Stop printing and press the
3 seconds.
Stop printing and press the
3 seconds. Then make sure that the installed printer
driver is correct for the printer.
Close the front feed slot.
6-125
Solving Problems
Ink cover open button to open the
Cancel/Reset button for
+
+ Cancel/Reset button for
| 125