Page 1 User Manual DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port November 2021...
Page 2: Table Of Contents
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port User Manual Contents Chapter 1. Introduction.........6 Contents and Audience............6 Conventions..............6 Document Structure............6 Chapter 2. Overview..........7 General Information............7 Specifications..............9 Product Appearance............17 Front Panel..............17 Side Panel...............19...
Page 3 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port User Manual Statistics..............75 Network Statistics............76 DHCP..............77 Routing..............78 Clients and Sessions.............80 Port Statistics............81 Multicast Groups............82 DSL Status...............83 IPsec Statistics............84 VPN Statistics............85 Connections Setup............86 WAN..............86...
Page 4 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port User Manual USB Modem..............223 Basic Settings............224 SMS..............227 USSD..............229 Advanced..............230 VLAN..............231 Interface Grouping............234 WAN Remapping............236 SNMP..............237 DNS..............240 DDNS..............242 Ports Settings............244 Redirect..............247 Routing..............248 TR-069 Client............250...
Page 5 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Introduction Support, 2 FXS Ports and USB Port User Manual Yandex.DNS..............344 Settings..............344 Devices and Rules............346 SkyDNS..............348 Settings..............349 Devices and Rules............351 Chapter 5. Operation Guidelines.......353 Safety Rules and Conditions..........353 Wireless Installation Considerations........354...
Page 6: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DSL-G2452GR and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.
Page 7: Chapter 2. Overview
Wi-Fi network efficiently, keeping high rates for HD media streaming, lag-free gaming, and fast transfer of large files. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications section, page 9.
Page 8 Smart adjustment of Wi-Fi clients is useful for networks based on several D-Link access points or routers – when the smart adjustment function is configured on each of them, a client always connects to the access point (router) with the highest signal level.
Page 9: Specifications
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Specifications Hardware Processor · RTL8685PB (1GHz) · 128MB, DDR2, built in processor Flash · 16MB, SPI Interfaces ·...
Page 10 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual DSL Parameters ATM/PPP Protocols · Bridged and routed Ethernet encapsulation · VC-based or LLC-based multiplexing · ATM Forum UNI3.1/4.0 PVC (up to 8 PVCs) ·...
Page 11 SSH/TELNET/WEB (HTTP/HTTPS) · Multilingual web-based interface for configuration and management · Support of D-Link Assistant application for Android and iPhone smartphones · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface · Automatic notification on new firmware version ·...
Page 12 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Wireless Module Parameters Frequency range · 2400 ~ 2483.5MHz · 5150 ~ 5350MHz The frequency range depends upon the ·...
Page 13 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Wireless Module Parameters Receiver sensitivity · 802.11a -86dBm at 6Mbps -65dBm at 54Mbps · 802.11b -90dBm at 1Mbps -76dBm at 11Mbps ·...
Page 14 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Phone General SIP Features · Support of several SIP profiles · Individual account per port · Invite with Challenge ·...
Page 15 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Operating Environment Power · Output: 12V DC, 1.5A Temperature · Operating: from 5 to 40 °C · Storage: from -20 to 70 °C Humidity ·...
Page 16 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Supported USB modems · Alcatel IK40V · D-Link DWM-222 · Huawei E3131 · Huawei E3272 · Huawei E3351 ·...
Page 17: Product Appearance
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The router is powered on. Solid green The firmware is being updated.
Page 18 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Mode Description The default WAN connection is on. Solid green The default WAN connection is off, or •...
Page 19: Side Panel
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Side Panel Figure 2. Side panel view. Name Description A port for connecting a USB device (modem, storage, printer).
Page 20: Back Panel
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Overview Support, 2 FXS Ports and USB Port User Manual Back Panel Figure 3. Back panel view. Port Description POWER Power connector. A button to restore the factory default settings.
Page 21: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 22: Chapter 3. Installation And Connection
(hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser. Also you can use D-Link Assistant application for Android or iPhone mobile devices (smartphones or tablets).
Page 23 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual USB Modem To connect to an LTE or 3G network, you should use a USB modem. Connect it to the USB port of...
Page 24: Connecting To Pc
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 25: Obtaining Ip Address Automatically (Os Windows 7)
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 26 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line.
Page 27 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 28 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 29 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 30: Obtaining Ip Address Automatically (Os Windows 10)
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 31 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 10. The Network & Internet window.
Page 32 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 33 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 34 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 35: Pc With Wi-Fi Adapter
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual PC with Wi-Fi Adapter 1. To connect via USB modem: connect your USB modem to the USB port located on the right side panel of the router.
Page 36: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 37 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 38 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DSL- G2452GR (for operating in the 2.4GHz band) or DSL-G2452GR-5G (for operating in the 5GHz band) and click the Connect button. Figure 17. The list of available networks.
Page 39: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 40 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 41 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DSL- G2452GR (for operating in the 2.4GHz band) or DSL-G2452GR-5G (for operating in the 5GHz band) and click the Connect button. Figure 21. The list of available networks.
Page 42: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DSL-G2452GR with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
Page 43 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
Page 44: Web-Based Interface Structure
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed.
Page 45 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data.
Page 46: Home Page
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Home Page The Home page displays links to the most frequently used pages with device's settings.
Page 47: Menu Sections
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Menu Sections To configure the router use the menu in the left part of the page.
Page 48: Notifications
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Installation and Connection Support, 2 FXS Ports and USB Port User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 28. The web-based interface notifications.
Page 49: Configuring Via Web-Based Interface
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network DSL-G2452GR (for operating in the 2.4GHz band) or DSL- G2452GR-5G (for operating in the 5GHz band) and click the NEXT button.
Page 50 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select another language.
Page 51: Selecting Operation Mode
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a VDSL or ADSL line, on the Device mode page, from the Connection method list, select the VDSL or ADSL value correspondingly.
Page 52 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In order to connect your device to a private Ethernet line, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value.
Page 53 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 54: Access Point Or Repeater
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value.
Page 55 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In order to let wired PCs connected to your device access the network of a wireless router, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 56: Configuring Lan Port As Wan Port
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Configuring LAN Port as WAN Port This configuration step is available for the Ethernet (LAN) connection method.
Page 57: Creating 3G/Lte Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating 3G/LTE WAN Connection This configuration step is available for the Mobile Internet mode. 1. If the PIN code check is enabled for the SIM card inserted into your USB modem, enter the PIN code in the PIN field and click the APPLY button.
Page 58 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual If the router failed to create a WAN connection automatically, click the CONFIGURE MANUALLY button. On the...
Page 59: Changing Lan Ipv4 Address
If you want to manually assign the LAN IPv4 address for DSL-G2452GR, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
Page 60: Wi-Fi Client
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes.
Page 61 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual When the Open or WEP authentication type is selected, the following settings are displayed on the...
Page 62: Configuring Wired Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Configuring Wired WAN Connection This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN) connection methods, and WISP Repeater mode.
Page 63: Static Ipv4 Or Ipoa Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Static IPv4 or IPoA Connection Figure 46. The page for configuring Static IPv4 WAN connection.
Page 64: Static Ipv6 Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Static IPv6 Connection Figure 47. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
Page 65: Pppoe, Pppoa, Ipv6 Pppoe, Pppoe Dual Stack
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual PPPoE, PPPoA, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 48.
Page 66: Pppoe + Static Ip (Pppoe Dual Access) Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 49. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.
Page 67: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 50. The page for configuring PPTP + Dynamic IP WAN connection.
Page 68: Pptp + Static Ip Or L2Tp + Static Ip Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 51. The page for configuring PPTP + Static IP WAN connection.
Page 69: Configuring Wireless Network
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Configuring Wireless Network This configuration step is not available for the Client mode. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
Page 70 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Mobile Internet, Router, and WISP Repeater modes only).
Page 71: Configuring Lan Ports For Iptv/Voip
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode. On the IPTV page, select the Is an STB connected to the device checkbox.
Page 72 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox.
Page 73: Changing Web-Based Interface Password
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields.
Page 74 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
Page 75: Statistics
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Statistics The pages of this section display data on the current state of the router: network statistics •...
Page 76: Network Statistics
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Network Statistics On the Statistics / Network Statistics page, you can view statistics for all connections existing in the system (WAN connections, LAN, WLAN).
Page 77: Dhcp
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
Page 78: Routing
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 60. The Statistics / Routing page.
Page 79 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 61. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 80: Clients And Sessions
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Clients and Sessions On the Statistics / Clients and Sessions page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
Page 81: Port Statistics
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router.
Page 82: Multicast Groups
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 83: Dsl Status
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual DSL Status The information shown on the Statistics / DSL Status page can be used for troubleshooting and diagnosing connection problems.
Page 84: Ipsec Statistics
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual IPsec Statistics On the Statistics / IPsec Statistics page, you can view statistics for IPsec tunnels of the router.
Page 85: Vpn Statistics
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual VPN Statistics On the Statistics / VPN Statistics page, you can view the list of clients connected to the PPTP or L2TP server of the router.
Page 86: Connections Setup
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
Page 87 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To create a new connection, click the ADD button ( ) in the Connections List section. Upon that the connection creation page opens.
Page 88 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To create several WAN connections, go to the advanced mode. To do this, click the ADVANCED MODE button.
Page 89: Creating Dynamic Ipv4, Static Ipv4, Or Ipoa Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 90 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function is enabled. Do not disable the function unless your ISP requires this.
Page 91 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 72. The page for creating a new Static IPv4 connection. The PTM section.
Page 92 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 73. The page for creating a new Static IPv4 connection. The ATM section.
Page 93 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 94 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 74. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter...
Page 95 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Hostname A name of the router specified by your ISP. Optional. The VLAN section is displayed for ADSL and VDSL WAN connections.
Page 96: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 97 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation NATv6 function for IPv6 is enabled.
Page 98 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 78. The page for creating a new Static IPv6 connection. The PTM section.
Page 99 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 79. The page for creating a new Static IPv6 connection. The ATM section.
Page 100 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 101 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 80. The page for creating a new Static IPv6 connection. The IPv6 section. Parameter...
Page 102 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server / Secondary IPv6 the relevant fields.
Page 103: Creating Pppoe Or Pppoa Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating PPPoE or PPPoA WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 104 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function is enabled. Do not disable the function unless your ISP requires this.
Page 105 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 84. The page for creating a new PPPoE connection. The PTM section.
Page 106 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 85. The page for creating a new PPPoE connection. The ATM section.
Page 107 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 108 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 86. The page for creating a new PPPoE connection. The PPP section. Parameter Description...
Page 109 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 110 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 87. The page for creating a new PPPoE connection. The IPv4 section. Parameter Description...
Page 111: Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating PPTP, L2TP, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 112 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 90. The page for creating a new PPTP connection. The PPP section. Parameter Description...
Page 113 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 114 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 91. The page for creating a new PPTP connection. The IPv4 section. Parameter Description...
Page 115 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual After clicking the button, the window for additional configuration of the connection opens. If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button.
Page 116: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 117 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description For the PPPoE Dual Stack type only. If the switch is moved to the right, the network address translation function is enabled.
Page 118 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 94. The page for creating a new PPPoE IPv6 connection. The Ethernet section.
Page 119 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 95. The page for creating a new PPPoE IPv6 connection. The PTM section.
Page 120 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 96. The page for creating a new PPPoE IPv6 connection. The ATM section.
Page 121 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 122 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 97. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter...
Page 123 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 124 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 98. The page for creating a new PPPoE Dual Stack connection. The IPv4 section.
Page 125 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Move the switch to the right to configure automatic assignment of Obtain DNS server IPv6 DNS server addresses.
Page 126: Creating Mobile Internet Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating Mobile Internet WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct...
Page 127 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function for IPv4 is enabled. Do not disable the function unless your ISP requires this.
Page 128 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description MODEM/SIM CARD Click the button in order to assign the connection to one of SELECTION connected USB modems.
Page 129 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The maximum size of units transmitted by the interface. Move the switch to the right if you want the router to...
Page 130 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Health Check Move the switch to the right to check the connection health using Enable the ICMP ping mechanism.
Page 131: Creating Bridge Wan Connection
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Creating Bridge WAN Connection On the connection creation page, go to the General Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 132 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 106. The page for creating a new Bridge connection. The Ethernet section.
Page 133 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 107. The page for creating a new Bridge connection. The PTM section.
Page 134 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 108. The page for creating a new Bridge connection. The ATM section.
Page 135 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 136 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The VLAN section is displayed for ADSL and VDSL WAN connections. Figure 109. The page for creating a new Bridge connection. The VLAN section.
Page 137: Lan
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change the IPv4 address of the router, configure the built-in DHCP server, specify MAC address and IPv4 address pairs, or add own DNS records.
Page 138 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Available if the Access point, Repeater, or Client mode was selected in the Initial Configuration Wizard.
Page 139 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Relay: An external DHCP server is used to assign IP • addresses to clients. When this value is selected, the...
Page 140 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the DHCP Options section, you can change default values for some options of DHCP protocol (IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP server should send to clients to configure the local network.
Page 141 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To remove the value of an option, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( ).
Page 142 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the IP address field, specify a host from the internal or external network. You can choose a device connected to the router's LAN at the moment.
Page 143: Ipv6
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Page 144 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings. Figure 118. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Page 145 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address).
Page 146 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 147: Wan Failover
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual WAN Failover On the Connections Setup / WAN Failover page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet.
Page 148 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority.
Page 149 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism.
Page 150: Auto Configuration Of 3G/Lte
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Auto Configuration of 3G/LTE On the Connections Setup / Auto сonfiguration of 3G/LTE page, you can enable the function for automatic creation of a mobile WAN connection upon plugging a USB modem into the router.
Page 151 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual If the PIN code check for the SIM card inserted into your USB modem is disabled, then an active WAN connection with the operator's settings will be automatically created when plugging the USB modem into the router.
Page 152: Traffic Balancing
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Traffic Balancing On the Connections Setup / Traffic balancing page, you can enable the traffic balancing function.
Page 153 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, specify the needed parameters. Parameter Description From the drop-down list, select a WAN connection to which traffic Connection balancing will be applied.
Page 154: Vpn
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In this menu you can configure VPN connections based on IPsec/GRE/EoGRE protocols and create a PPTP or L2TP server and accounts for access to it.
Page 155 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 127. The page for adding an IPsec tunnel. The General Settings section. You can specify the following parameters:...
Page 156 The field is available for editing if the Dynamic IPsec switch is moved to the left. A remote host identifier to establish connection over IPsec with particular hosts only. To establish connection, DSL-G2452GR remote Remote identifier identifier value should correspond to the local identifier value specified in the settings of the remote host.
Page 157 • the default WAN connection. A local identifier of the router to establish connection over IPsec with particular hosts only. To establish connection, DSL-G2452GR local Local identifier identifier value should correspond to the remote identifier value specified in the settings of the remote host. Use an IP address, domain name, or certificate CN.
Page 158 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Move the switch to the left to deny access to your router from the Allow traffic from remote subnet via IPsec.
Page 159 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 128. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections.
Page 160 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Move the switch to the right to enable the aggressive mode for mutual Aggressive Mode authentication of the parties.
Page 161 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 129. The page for adding an IPsec tunnel. The window for adding a tunneled network.
Page 162 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Click the SAVE button. To edit fields in the Tunneled Networks section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 163: Gre
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the VPN / GRE page, you can configure VPN tunnels based on GRE protocol.
Page 164 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual You can specify the following parameters: Parameter Description Tunnel settings Move the switch to the right to enable the GRE tunnel.
Page 165: Pptp/L2Tp Servers
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual PPTP/L2TP Servers On the VPN / PPTP/L2TP Servers page, you can enable the PPTP or L2TP VPN server. To configure the PPTP or L2TP server, go to the relevant tab.
Page 166 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To enable the server, move the Enable switch to the right. You can specify the following parameters:...
Page 167 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Authentication Move the switch to the right to enable authentication. Upon that the...
Page 168 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Advanced Settings Available on the PPTP tab. Maximum number of The maximum number of devices allowed to connect to the PPTP connections server.
Page 169 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The mode of IP address assignment. Select a value from the drop- down list.
Page 170: Vpn Users
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual VPN Users On the VPN / VPN Users page, you can create user accounts to provide authorized access to a PPTP or L2TP server.
Page 171: Eogre
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual EoGRE On the VPN / EoGRE page, you can configure VPN tunnels based on EoGRE technology.
Page 172 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Remote IP address The IP address of the remote local subnet. Move the switch to the right to assign a tag (VLAN ID) to EoGRE Tagged traffic traffic and specify the needed value in the VLAN ID field displayed.
Page 173: Wi-Fi
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
Page 174 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
Page 175 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The wireless channel number. To select a channel manually, left-click; in the opened window, select a channel and click the SAVE button.
Page 176 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed parameters and click the APPLY button.
Page 177 Move the switch to the left not to limit the maximum bandwidth. If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DSL-G2452GR can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule icon ( ).
Page 178 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Move the switch to the right to forbid wireless clients of this Clients isolation wireless network to communicate to each other.
Page 179 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Authentication type Description A mixed type of authentication. When this value is selected, devices WPA/WPA2 mixed using the WPA authentication type and devices using the WPA2 authentication type can connect to the wireless network.
Page 180 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n or...
Page 181 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or WPA2- PSK/WPA3-SAE mixed value is selected, the following fields are displayed on the page: Figure 142.
Page 182 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description For WPA2-PSK, WPA3-SAE, and WPA2-PSK/WPA3-SAE mixed authentication types only. Protected Management Frames help to improve packet privacy protection for wireless data transmission.
Page 183 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description IP address RADIUS The IP address of the RADIUS server. server RADIUS server port A port of the RADIUS server.
Page 184: Client Management
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.
Page 185: Wps
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
Page 186 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual If you want to disable activating the WPS function via the hardware button, on the tabs of both bands, move the Enable WPS function with hardware button switch to the left and make sure that the WPS function is not activated via the web-based interface.
Page 187: Using Wps Function Via Web-Based Interface
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.
Page 188: Using Wps Function Without Web-Based Interface
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
Page 189: Wmm
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 190 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The WMM function allows assigning priorities for four Access Categories (AC): BK (Background), low priority traffic (print jobs, file downloads, etc.).
Page 191 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Transmission Opportunity. The higher the value, the higher is the TXOP Access Category priority.
Page 192: Client
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
Page 193 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Wireless Networks section, the list of available wireless networks is displayed. To view the latest data on available wireless networks, click the UPDATE LIST button.
Page 194 When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DSL-G2452GR will switch to the channel of the access point to which you have connected. In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed.
Page 195: Client Shaping
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Client Shaping On the Wi-Fi / Client Shaping page, you can limit the maximum bandwidth of upstream and downstream traffic for each wireless client of the router by its MAC address.
Page 196 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network.
Page 197: Additional
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router.
Page 198 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab).
Page 199 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Available on the 5 GHz tab. Move the switch to the right to enable the DFS (Dynamic Frequency Selection) mechanism.
Page 200 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description 802.11v roaming allows improving the wireless client load balancing. If the wireless access point supports 802.11v standard, then with a...
Page 201 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The minimum size (in bytes) of a packet for which an RTS frame is RTS threshold transmitted.
Page 202: Mac Filter
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 203 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 153. The window for adding a rule for the MAC filter. You can specify the following parameters:...
Page 204 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
Page 205: Roaming
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Roaming On the Wi-Fi / Roaming page, you can enable the function of smart adjustment of Wi-Fi clients.
Page 206 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To enable the function, click the ENABLE button. Upon that the following settings are available on the page.
Page 207: Print Server
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 208: Usb Storage
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...
Page 209: Information
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Information On the USB Storage / Information page, you can view data on the USB storage connected to the router.
Page 210: Usb Users
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 211 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To view passwords of all user accounts, move the Show password switch to the right.
Page 212: Samba
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 213 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.
Page 214: Ftp
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 215 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To allow access to all the content of the USB storage for users of your LAN again, remove the value specified in the Directory field and click the APPLY button.
Page 216: Filebrowser
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Page 217: Dlna
USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 218 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 164. Specifying a media folder. In the opened window, locate a folder containing files. To do this, click the Search icon ( ) in the Path field.
Page 219: Torrent Client
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
Page 220 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual You can specify the following parameters: Parameter Description Transmission Enable Move the switch to the right to activate the Transmission client.
Page 221 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The username to access the web-based interface of the Transmission Username client. The password to access the web-based interface of the Transmission Password client.
Page 222 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select the torrent file which you want to remove from the download queue and click the button.
Page 223: Usb Modem
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual USB Modem This menu is designed to operate USB modems. Some models of USB modems do not allow performing operations available in this menu section through the web-based interface of the router.
Page 224: Basic Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Basic Settings On the USB Modem / Modem name / Basic Settings page, you can view data on the USB modem connected to the router, change the PIN code of the SIM card inserted into your USB modem, disable or enable the check of the PIN code.
Page 225 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Network information Mode A type of the network to which the USB modem is connected.
Page 226 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the PIN input window), the SIM card inserted into your USB modem is blocked.
Page 227: Sms
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual When a new text message is received, the relevant notification will be displayed in the top right corner of the page.
Page 228 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To create and send a text message, click the New message button ( Figure 172. The window for creating a new text message.
Page 229: Ussd
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual USSD On the USB Modem / Modem name / USSD page, you can send a USSD command.
Page 230: Advanced
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Advanced In this menu you can configure advanced settings of the router: create or edit VLANs •...
Page 231: Vlan
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces.
Page 232 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To create a new VLAN, click the ADD button ( Figure 176. The page for adding a VLAN.
Page 233 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select a type for the port included in this VLAN. Untagged: Untagged traffic will be transmitted through the •...
Page 234: Interface Grouping
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Interface Grouping On the Advanced / Interface Grouping page, you can create groups consisting of interfaces and ports of the router, for example, for distinguishing different types of traffic.
Page 235 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description A name for the group for easier identification. You can specify any Name name.
Page 236: Wan Remapping
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual WAN Remapping On the Advanced / WAN Remapping page, you can configure the router to connect to a private Ethernet line.
Page 237: Snmp
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual SNMP On the Advanced / SNMP page, you can enable and configure the SNMP agent of the router.
Page 238 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In order to enable the SNMP agent, in the Configuration section, move the Enable SNMP switch to the right.
Page 239 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, specify the needed parameters: Parameter Description Name Specify a username for access from the SNMP manager.
Page 240: Dns
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 182. The Advanced / DNS page.
Page 241 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual You can specify the addresses of DNS servers manually on this page or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection.
Page 242: Ddns
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 243 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS.
Page 244: Ports Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 245 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 186. The window for changing the settings of the router's port. In the opened window, specify the needed parameters:...
Page 246 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Autonegotiation Modes To enable the needed data transfer modes, move relevant switches to the right.
Page 247: Redirect
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure.
Page 248: Routing
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 188. The Advanced / Routing page.
Page 249 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route.
Page 250: Tr-069 Client
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
Page 251 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description The interface which the router uses for communication with the ACS. Leave the Automatic value to let the device select the...
Page 252: Port Mirroring
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Port Mirroring On the Advanced / Port Mirroring page, you can enable the function of mirroring the router’s ports.
Page 253 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select the mode for each port traffic from which should be copied to the destination port.
Page 254: Upnp Igd
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
Page 255: Udpxy
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application.
Page 256 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To access the status page of the application, click the Status link. Figure 194. The UDPXY application status page.
Page 257: Xdsl
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual xDSL The Advanced / xDSL page includes the set of ADSL and VDSL standards that should be defined by an ISP.
Page 258: Igmp
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP.
Page 259: Alg/Passthrough
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions.
Page 260 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.
Page 261: Voip
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phones connected to the router.
Page 262 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description A connection or a group interfaces of the router for VoIP. Select the needed value from the drop-down list.
Page 263 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To remove an existing profile, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( When all needed settings are configured, click the APPLY button.
Page 264: Advanced Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Advanced Settings On the VoIP / Advanced Settings page, you can specify additional settings for VoIP.
Page 265 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select your country from the drop-down list. This setting defines the Locale selection parameters of the phone signals traditional for the specific country.
Page 266 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description A public (“white”) IP address of an upper-level router which Public address exchanges service messages with the SIP proxy server.
Page 267: Rings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Rings On the VoIP / Rings page, you can configure ring signal parameters. Figure 202. The VoIP / Rings page.
Page 268 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 204. The window for specifying signal parameters. In the opened window, fill in the Signal length and Pause length fields. For each ring, you can specify several variants of signal and pause length in milliseconds which will be used cyclically in the order of their appearance on the page.
Page 269: Security
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.
Page 270: Profile Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Profile Settings In this menu section, you can do the following for your profile (Voice profile is created by...
Page 271: Basic Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Basic Settings On the VoIP / Profile Name / Basic Settings page, you can configure basic profile settings for VoIP over SIP.
Page 272 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description SIP Outbound Proxy Address An IP or URL address of the SIP outbound proxy server.
Page 273 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description SIP Domain Move the switch to the right if your ISP requires to specify a domain Use domain to register name upon registration on the SIP proxy server.
Page 274 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To change parameters of a SIP line, select the relevant line in the table. Figure 208. The page for editing SIP line settings.
Page 275 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description A number for this line. SIP ID / Number The called party sees the specified value as the caller number.
Page 276 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Move the switch to the right to reject all incoming calls at a certain time of day.
Page 277 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Hotline Move the switch to the right to make the phone connected to this...
Page 278: Call On Event
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Call on Event On the VoIP / Profile Name / Call on Event page, you can configure calls on different events.
Page 279 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 211. The window for adding an event. In the opened window, you can specify the following parameters:...
Page 280: Additional Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Additional Settings On the VoIP / Profile Name / Additional Settings page you can configure additional profile settings for VoIP over SIP.
Page 281 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Common Settings Move the switch to the right to enable the PRACK method (Provisional Response ACKnowledgement).
Page 282 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Telephone Event Relay From the drop-down list, select a mode for DTMF signal transmission.
Page 283 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Jitter Buffer The Jitter Buffer parameter improves the quality of voice transmission: received voice packets are specially delayed, which...
Page 284: Fax Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Fax Settings On the VoIP / Profile Name / Fax Settings page, you can specify settings of data receipt/transfer for the fax machines connected to the FXS ports of the router.
Page 285 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description T.38 Move the switch to the right to allow support of the T.38 protocol. If the switch is moved to the right, the Port field, the Fax/Modem Enable T.38 support...
Page 286 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Passthrough Move the switch to the right to enable the Fax Passthrough Use Fax Passthrough mechanism.
Page 287: Audio Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Audio Settings On the VoIP / Profile Name / Audio Settings page, you can configure audio parameters, volume and voice codecs.
Page 288 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Audio Settings Comfort Noise Generation.
Page 289 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Codecs Settings section, you can configure work of voice codecs in use. Figure 216. The VoIP / Profile Name / Audio Settings page. The Codecs Settings section.
Page 290 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description To enable the codec, move the switch to the right.
Page 291: Call Routing
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Call Routing On the VoIP / Profile Name / Call Routing page, you can configure speed dial parameters and dialplan settings.
Page 292 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule.
Page 293 User Manual In the Numbering Plan section, you can configure abbreviated dial, local calls, calls by IP, and combinations of keys on the phone to change some parameters of DSL-G2452GR directly from the connected phones. Figure 219. The VoIP / Profile Name / Call Routing page. The Numbering Plan section.
Page 294 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Enable Call Forwarding On Busy Enables call forwarding when this line is busy.
Page 295 Description A combination of keys on the phone connected to the Prefix router to activate an action. An action or operation performed by the DSL-G2452GR Action after the prefix is dialed. Select the required action from the drop-down list. Remove digits from position The first symbol to be removed from the dialed prefix.
Page 296 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description If needed, specify an additional parameter for the selected action, for example, INVITE to send a service...
Page 297: Call Logging
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Call Logging On the VoIP / Profile Name / Call Logging page, you can configure the call log parameters and view information on all calls for your profile.
Page 298 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To sort the log records, in the Call History section, left-click the name of a column and click the...
Page 299: Firewall
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering •...
Page 300 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 224. The page for adding a rule for IP filtering. You can specify the following parameters:...
Page 301 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select an action for the rule. Allow: Allows packet transmission in accordance with the •...
Page 302 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Select the destination of the packet direction from the Destination drop-down list. Router: The rule will be applied to the packets transmitted •...
Page 303 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Subnet IPv4 address / The source subnet IPv4 or IPv6 address. The field is displayed when Subnet IPv6 address the Subnet value is selected from the Set as drop-down list.
Page 304 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To edit a rule, select the relevant line in the table. In the opened window, change the needed parameters and click the APPLY button.
Page 305: Virtual Servers
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 306 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 226. The page for adding a virtual server. You can specify the following parameters:...
Page 307 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description A protocol that will be used by the new virtual server. Select a value Protocol from the drop-down list.
Page 308 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To edit the parameters of an existing server, select the relevant line in the table. On the opened page, change the needed parameters and click the APPLY button.
Page 309: Dmz
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks.
Page 310 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To set a schedule for the DMZ, click the Set schedule icon ( ). In the opened window, from...
Page 311: Mac Filter
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Page 312 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
Page 313: Url Filter
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
Page 314 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ).
Page 315 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To set a schedule for the URL filter, click the Set schedule icon ( ). In the opened window,...
Page 316: Remote Access
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Remote Access On the Firewall / Remote Access page, you can configure access to the web-based interface of the router.
Page 317 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.
Page 318 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To remove a rule for remote access, select the checkbox located to the left of the relevant line in the...
Page 319: System
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual System In this menu you can do the following: change the password used to access the router's settings •...
Page 320: Configuration
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Configuration On the System / Configuration page, you can change the password for the administrator account...
Page 321 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can...
Page 322: Firmware Update
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
Page 323 Support, 2 FXS Ports and USB Port User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete icon ( ) in the line of the address.
Page 324: Local Update
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 325: Remote Update
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 326: Schedule
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the device on a schedule, and set a schedule for different rules and settings of the firewall.
Page 327 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, in the System Time field, the system time of the device is displayed. You...
Page 328 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To set a schedule for a task which will be applied to a rule or setting of the firewall or will...
Page 329 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Simplified mode Specify a schedule name for easier identification. You can specify Schedule name any name.
Page 330 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To remove a schedule, in the All Tasks section, select the checkbox located to the left of the...
Page 331: Log
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
Page 332 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Logging Select a type of logging from the drop-down list. Local: The system log is stored in the router's memory. When •...
Page 333 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.
Page 334: Ping
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
Page 335 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Figure 241. The System / Ping page. The additional settings window. In the opened window, in the Packet size field, specify the volume of data sent in a request. In the Waiting for response field, specify the response waiting period in seconds.
Page 336: Traceroute
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
Page 337 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To specify additional settings, click the MORE SETTINGS button. Figure 243. The System / Traceroute page. The additional settings window.
Page 338: Telnet/Ssh
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN.
Page 339: System Time
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 340 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual To enable automatic synchronization with a time server, follow the next steps: 1. Move the Enable NTP switch to the right.
Page 341 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description A time period (in seconds) after which a request to synchronize the system time will be sent to the NTP server.
Page 342: Auto Provision
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Auto Provision On the System / Auto Provision page, you can enable the Auto Provision function.
Page 343 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Parameter Description Autoconfiguration The IP or URL address of your ISP's server where the configuration server address file is stored.
Page 344: Yandex.dns
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
Page 345 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed...
Page 346: Devices And Rules
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately.
Page 347 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
Page 348: Skydns
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
Page 349: Settings
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation.
Page 350 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual The default filtering profile will be applied to all devices newly connected to the router's network.
Page 351: Devices And Rules
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual Devices and Rules On the SkyDNS / Devices and Rules page, you can assign a specific filtering profile to a device connected to the router's network.
Page 352 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Configuring via Web-based Interface Support, 2 FXS Ports and USB Port User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied.
Page 353: Chapter 5. Operation Guidelines
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Operation Guidelines Support, 2 FXS Ports and USB Port User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.
Page 354: Wireless Installation Considerations
User Manual Wireless Installation Considerations The DSL-G2452GR device lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
Page 355: Chapter 6. Abbreviations And Acronyms
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Abbreviations and Acronyms Support, 2 FXS Ports and USB Port User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol...
Page 356 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Abbreviations and Acronyms Support, 2 FXS Ports and USB Port User Manual HTTPS Hypertext Transfer Protocol Secure ICMP Internet Control Message Protocol Identifier Internet Gateway Device IGMP Internet Group Management Protocol...
Page 357 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Abbreviations and Acronyms Support, 2 FXS Ports and USB Port User Manual OFDM Orthogonal Frequency Division Multiplexing Password Authentication Protocol Push Button Configuration Perfect Forward Secrecy Personal Identification Number...
Page 358 DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN Abbreviations and Acronyms Support, 2 FXS Ports and USB Port User Manual SSID Service Set Identifier STBC Space-time block coding Transmission Control Protocol TKIP Temporal Key Integrity Protocol...

D-Link DSL-G2452GR User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4 Configuring Via Web-Based Interface

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DSL-G2452GR

Summary of Contents for D-Link DSL-G2452GR