PowerLite Quick Setup Unpack the projector You should have the following items: Projector and lens cover Projector CD-ROMs Remove the protective pad from the lens cover and save it for transporting the projector. Avoid touching the lens with your bare hands to prevent damage to the lens surface. Set up the remote control Remove the battery cover.
Choose a location You can set up the projector in a variety of ways. The projector’s short-throw lens leaves plenty of room for your audience and allows you to present comfortably in front of them without casting a shadow on the screen.
Page 3
Connect your video source Connect the projector to a computer or video source using any of the available connections shown below. • Check the connectors on your video equipment. If more than one connection is available, choose the one that provides the best quality.
5 seconds. Start your video or presentation. If you have connected more than one video source, use the Source Search button on the projector or remote control to select the one you want to watch. I f your image does not appear on the screen, see the NOTE Troubleshooting section for help.
Install your User’s Guide and register your projector Insert the PowerLite projector CD-ROM in your drive. If the installer doesn’t open automatically, double-click the Epson CD-ROM icon, then double-click the Epson installer icon. Choose your language, then follow the instructions on the screen to register.
Select VGA Display or Color LCD, click Arrangement or Arrange, and make sure Mirror Displays is checked. Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.