Epson PowerLite 53c Product Information
Epson PowerLite 53c Product Information

Epson PowerLite 53c Product Information

Epson powerlite 53c: product information
Hide thumbs Also See for PowerLite 53c:

Advertisement

Quick Links

Remote control receiver
Foot
Focus ring
Lens cap
Computer/Component Video port
Monitor Out port
S-Video port
Remote control
receiver
Power inlet
Audio1 port
Audio2 L and R ports

Specifications

General
Type of display
Poly-silicon TFT active matrix
73: with MLA (Micro Lens Array)
53: without MLA (Micro Lens Array)
LCD panels (3)
Diagonal size: 0.7 inches (17.8 mm)
Lens
F=1.70 to 1.87,
focal length=21.3 to 25.6 mm
Resolution
1024
×
800
Color
Full color, 16.7 million colors
reproduction
Brightness
53: 1700 lumens (High brightness mode)
(ANSI)
1400 lumens (Low brightness mode)
73: 1500 lumens (High brightness mode)
1200 lumens (Low brightness mode)
Contrast ratio
500:1
Image size
30 to 300 inches (0.8 to 7.6 meters)
Control panel
Foot release lever
Foot
Composite video port
USB ports
Security lock port
RS-232C port
×
768 pixels (73)
600 pixels (53); (native formats)
Projection
distance
Projection
methods
Internal
sound system
Zoom ring
Optical aspect
ratio
Zoom ratio
Noise level
Keystone
correction angle
Projection Lamp
Power
consumption
Lamp life
Part number
Remote Control
Range
Battery
Mouse Compatibility
Dimensions
Height
Width
Depth
Weight
Electrical
Rated frequency
Power supply
Power
consumption
Environmental
Temperature
Humidity
(non-condensing) Storage: 10 to 90% RH
11/02
EPSON PowerLite 53c/73c Projector
2.9 to 34.4 feet (0.9 to 10.5 meters)
Front, rear, upside-down (ceiling
mount)
1 W monaural
4:3 (horizontal : vertical)
1 : 1.2
36 dB (High brightness mode)
33 dB (Low brightness mode)
±
15° vertical (maximum)
165 W
About 1500 hours
V13H010L21
20 feet (6 meters)
CR2025 lithium
Supports USB
3.4 to 3.8 inches (87 to 97 mm)
12.4 inches (315 mm)
9.5 inches (240 mm)
6.4 lb (2.9 kg)
50/60 Hz
100 to 120 VAC, 2.6 A
200 to 240 VAC, 1.3 A
Operating: 240 W
Standby: 2.6 W
Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Operating: 20 to 80% RH,
EPSON PowerLite 53c/73c Projector
1
-

Advertisement

Table of Contents
loading

Summary of Contents for Epson PowerLite 53c

  • Page 1: Specifications

    100 to 120 VAC, 2.6 A 200 to 240 VAC, 1.3 A Operating: 240 W Standby: 2.6 W Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Operating: 20 to 80% RH, EPSON PowerLite 53c/73c Projector...
  • Page 2 The image is resized using EPSON’s SizeWise Technology. Resized on the PowerLite 73c only; native mode on the PowerLite 53c. Resized on the PowerLite 53c only; native mode on the PowerLite 73c. Resized on the PowerLite 73c only; not available on the PowerLite 53c.
  • Page 3: Positioning The Projector

    Leave at least 8 inches between the projector and a wall. ❏ Make sure the projector is within 6 feet of an electrical outlet or extension cord and within 5 feet of your computer and/or video source.
  • Page 4 2. Connect one end of the power cord to the projector’s power inlet. 3. Connect the other end to an electrical outlet. The power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on.
  • Page 5: Adjusting The Height Of Your Image

    ❏ If your image looks like projector off to one side of the screen, at an angle. Move it Zoom ring directly in front of the center of the screen, facing the screen squarely.
  • Page 6: Adjusting The Color Mode

    30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the P button.
  • Page 7: Using The Remote Control

    Make sure there Note is plenty of space around Most of the projector’s features can only be accessed with the remote and under the projector for ventilation. Also clean control. To avoid losing the remote control, place it in the remote the air filter (see page 9).
  • Page 8 ❏ Dispose of used batteries according to local regulations. ❏ Remove the battery if you won’t be using the projector for a long period of time. Follow these steps to replace the battery: 1. Press the tab towards the center of the remote and slide the battery tray out of the remote control.
  • Page 9: Cleaning The Lens

    1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. Turn the projector upside-down. 3. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the filter using a very soft brush (such as an artist’s camel-hair brush).
  • Page 10: Replacing The Lamp

    Note To see how many hours the lamp has been used, see page 11. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number . In Canada, please call (800) 463-7766 to locate V13H010L21 a dealer.
  • Page 11: Optional Accessories

    9. Position the lamp cover so the arrows on the lamp cover align with the arrows on the projector. Then slide in the cover until it clicks into place. 10.Now reset the lamp timer as described below. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear warning message.
  • Page 12 EPSON PowerLite 53c/73c Projector EPSON PowerLite 53c/73c Projector 11/02...

This manual is also suitable for:

Powerlite 73c

Table of Contents