Sealey SL69S Owner's Manual
  1. Manuals
  2. Brands
  3. Sealey Manuals
  4. Remote Starter
  5. SL69S
  6. Owner's manual

Sealey SL69S Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL :
SL69S
Jump Starter
OWNER'S MANUAL
PLEASE SAVE THIS OWNER'S MANUAL AND READ BEFORE
USE. This manual will explain how to use the unit safely and
effectively. Please read and follow these instructions and
precautions carefully.
SL69S issue: 2 (10,11) 06/02/20

Advertisement

Table of Contents
loading

Related Manuals for Sealey SL69S

Summary of Contents for Sealey SL69S

  • Page 1 SL69S Jump Starter OWNER’S MANUAL PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE USE. This manual will explain how to use the unit safely and effectively. Please read and follow these instructions and precautions carefully. SL69S issue: 2 (10,11) 06/02/20...

  • Page 2: Table Of Contents

    CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............2 PERSONAL PRECAUTIONS ................3 PREPARING TO USE THE UNIT ..............4 FOLLOW THESE STEPS WHEN CONNECTING TO A BATTERY .....4 FEATURES ....................6 CHARGING THE JUMP STARTER ...............6 OPERATING INSTRUCTIONS ..............7 MAINTENANCE INSTRUCTIONS ..............9 STORAGE INSTRUCTIONS .................9 TROUBLESHOOTING ..................9 SPECIFICATIONS ..................10 SAFETY SYMBOLS Refer to...

  • Page 3: Personal Precautions

    1.4 Do not expose the unit to rain or snow. 1.5 Use only recommended attachments (SSL-JC jump cable). Use of an attachment not recommended or sold by Sealey for the SL69S may result in a risk of fire, electric shock or injury to persons or damage to property.

  • Page 4: Preparing To Use The Unit

    Avoid touching your eyes while working near the battery. 2.8 Read the Material Safety Data Sheet available from www.sealey. co.uk. In the event of an accident seek medical attention. 3. PREPARING TO USE THE UNIT WARNING! RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS A HIGHLY CORROSIVE SULPHURIC ACID.

  • Page 5: Features

    4.7 For a positive-grounded vehicle, connect the NEGATIVE (BLACK) clamp from the jump starter to the NEGATIVE (NEG, N, -) ungrounded post of the battery. Connect the POSITIVE (RED) clamp to the vehicle chassis or engine block away from the battery. Do not connect the clamp to the carburettor, fuel lines or sheet-metal body parts.

  • Page 6: Charging The Jump Starter

    6. CHARGING THE JUMP STARTER IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND EVERY 30 DAYS, OR WHEN THE CHARGE LEVEL FALLS BELOW 85%, TO KEEP THE INTERNAL BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE. 6.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY 1.
  • Page 7 9. Recharge the unit as soon as possible after each use. 7.2 CHARGING A MOBILE DEVICE, USING THE USB PORTS The SL69S includes three USB ports. The standard one provides up to 2.4A at 5V DC. The second port is a 3A input/output USB.

  • Page 8: Maintenance Instructions

    2. Slide the ON/OFF switch to the ON position. Charging should begin automatically. The display will show which port is in use. 3. Charging time will vary, based on the mobile device’s battery size and the charging port used. NOTE: Most devices will charge with any of the USB ports, but may charge at a slower rate.

  • Page 9: Troubleshooting

    10. TROUBLESHOOTING Jump Starter PROBLEM SOLUTION The jump starter’s display will Make sure the unit is charged. not turn on. Connect to a power source, to reset. Make sure the ON/OFF switch is set to the ON position. The thermometer symbol The unit is too hot or cold.

  • Page 10: Specifications

    BEHAVIOUR REASON Solid Red and Green LEDs; Auto shut-off due to inactivity. Disconnect no beep and reconnect clamps to the vehicle battery. Solid Red and Green LEDs; Temperature protection beeps once per second. NOTE: When the condition is corrected, the smart cable will automatically reset.
  • Page 11 Parts support is available for this product. To obtain parts, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
  • Page 12 2011/65/EU RoHS Directive This declaration of conformity is issued under the sole responsibility of the manufacturer: Jack Sealey Ltd, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR Declaration of Conformity in accordance with the above Directive(s)� References to harmonised standard(s) EN 55032:2015�����������������������������������������������������������������������������...

Table of Contents