Range Batteries Audio1 Mouse Compatibility Supports PS/2 and USB Remote IR Receiver Supports EPSON Remote IR Receiver (typically used for rear screen projection) 4/02 EPSON PowerLite 600p/811p/820p Projectors - 1 Poly-silicon Thin Film Transistor (TFT), active matrix Diagonal: 0.9 inches (22.9 mm) F=1.74 to 2.06, f=28.3 to 37.98 mm...
Page 2
Some images are automatically resized to display in the projector’s native format. The frequencies of some computers may not allow images to display correctly; see your computer’s documentation for details. 2 - EPSON PowerLite 600p/811p/820p Projectors Refresh rate Mode (Hz)
Page 3
ELP Link program. You can × download this program, plus its User’s Guide, from EPSON’s web site at support.epson.com. You’ll also need a serial or USB × supported cable to connect the projector to the computer.
Once the projector is connected to your computer or video source and plugged in, press the red projector to turn it on. The P power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds.
Page 5
® or iBook Macintosh ® OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels Monitors Monitors and Sound 2.
❏ If your image looks like projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. If you still can’t get a square image, press the left or right button on the projector’s control panel.
❏ A fluorescent light is shining into the infrared receiver ❏ A strong light source (such as direct sunlight) shines into the infrared receiver ❏ Other equipment emitting infrared energy is present (such as a radiant room heater) 4/02 EPSON PowerLite 600p/811p/820p Projectors - 7...
Page 8
Special effects buttons (1-3) Left mouse button Menu Comp1 Video Auto P in P 8 - EPSON PowerLite 600p/811p/820p Projectors This table summarizes the functions on the remote control. Button Power R/C on/off Freeze Power A/V Mute Previous slide Next slide...
Page 9
If the dirt is difficult to remove or the filter is broken, replace it. Contact your dealer or call EPSON at (800) 873-7766 in the United States to obtain a new one. In Canada, please call (800) 463-7766 for dealer referral.
Page 10
Note: You can check to see how many hours the lamp has been used through the About menu. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L15. In Canada, please call (800) 463-7766 for dealer referral.
SOURCE 23 SOURCE 24 You can purchase these accessories from your dealer or by SOURCE 41 calling EPSON at (800) 873-7766; or visit the EPSON Store SOURCE 42 at www.epsonstore.com (U.S. sales only). In Canada, please call MUTE ON (800) 463-7766 for dealer referral.