Quick Setup - Epson PowerLite 6100i Quick Setup

U
sing the remote control
1
If this is your first time using the remote, make sure its batteries
are installed as shown.
You can use the remote control to operate the projector as described below.
For more information on using the remote control, see your User's Guide.
Zoom in and out on part
of the projected image
Turn off projector
display and sound
Choose which source
to display
Optimize the
computer image
W
here to get help
Telephone Support Services
To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 to 6
AM
Friday, for the duration of your warranty period. You may also speak with
a projector support specialist by dialing one of these numbers:
U.S.: (562) 276-4394, 6
AM
Monday through Friday
Canada: (905) 709-3839, 6
AM
Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services
Epson provides technical assistance through electronic support
services 24 hours a day at http://support.epson.com. For tips, templates,
and training for developing successful presentations go to
http://www.presentersonline.com.
Register today to get product updates, special promotions, and
customer-only offers. You can use the registration card or CD included
with your projector, or register online at www.epson.com/webreg.
Epson is a registered trademark, and Instant Off and Exceed Your Vision are trademarks of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2006 Epson America, Inc. 5/06
Printed in XXX
Turn projector on and off
Navigate projector menus
Control projector volume
, Pacific Time, Monday through
PM
to 6 , Pacific Time,
PM
to 6 , Pacific Time,
PM
Epson PowerLite 6100i
T
roubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on
your notebook, check the following:

M ake sure the Power light on the projector is green and
not flashing.

P ress the Source Search button on the projector to select the
computer as the image source.

I f you're using a Windows
keyboard that lets you display on an external monitor. It may be
labelled CRT/LCD or have an icon such as . You may have to
hold down the Fn key while pressing it. Allow a few seconds for
the projector to sync up after changing the setting.
If the projector and notebook
don't display the same image...
If your image displays either on the projector or notebook, but not on
both, check the following:
Windows
Try using the CRT/LCD or key as described above. On most systems,
this key lets you toggle between the LCD screen and the projector,
or display on both at the same time.
If that doesn't work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1. From the Windows Control Panel, open the Display utility.
2. I n the Display Properties dialog box, click the
Settings tab, then click Advanced.
3. T he method for adjusting the setting varies;
you may have to click a Monitor tab, then
make sure the external Monitor port is set
as your primary display and/or enabled.
See your notebook's manual or online help
for details.
Mac OS X
®
1. From the Apple menu, select System
®
Preferences, then select Displays.
2. S elect the VGA Display or Color LCD
dialog box.
3. C lick the Arrangement (or Arrange) tab
and click Mirror Displays.
Mac OS 9.x or earlier
1. F rom the Apple menu, select Control Panels,
then click Monitors or Monitors and Sound.
2. Click the Arrange icon.
3. D rag one monitor icon
on top of the other.
If the Arrange option isn't available, click the
Monitor icon and select a Simulscan resolution.

Quick Setup

notebook, press the function key on your
®
CPD-21896