Bosch GWS18V-8 Operating/Safety Instructions Manual page 11

2610067310_04-21_GWS18V-8.qxp_GWS 4/1/21 10:06 AM Page 11
Functional Description and Specifications
reduce the risk of starting the tool accidentally.
Model number
Battery
Rated speed
Switch Type
Spindle thread
Max. spindle length
Max.Type 27 grinding wheel ⌀
Type 27 grinding wheel thickness
Max.Type 41/1A, 27A cutting wheel ⌀
Max. flap disc ⌀
Max. sanding disc ⌀
Max. wire wheel ⌀
Max. wire cup brush ⌀
reduce the risk of starting the tool accidentally.
Inserting and Releasing
Battery Pack
This tool is equipped with Automatic
Restart Protection. This feature helps
prevent accidental startups after power has
been interrupted, e.g. the battery was
removed with the switch locked in the on
position. To resume operation, turn the side
switch to the off position, and back to on
position to restart the tool.
Make sure that the side switch (Fig. 1) is in
the off position before inserting or removing
battery pack. To insert the battery pack
slide it into the housing until the battery
pack locks into position.
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories. Such preventive safety measures
Assembly
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories. Such preventive safety measures
GWS18V-8
18V (Bosch Series)
n 11,000/min
Side
5/8"-11 UNC
9/16" (14,3 mm)
4 1/2" (115mm)
1/8" - 1/4" (3mm - 6mm)
4 1/2" (115mm)
4 1/2" (115mm)
4 1/2" (115mm)
4" (102mm)
3" (76 mm)
To remove the battery pack, press the
battery pack release button and slide the
battery pack forward.
Press the battery pack release button again
and slide the battery pack completely out of
tool housing (Fig. 2).
-11-
Fig. 2