Using The Direct Power On Function - Epson PowerLite 755c User Manual

3. Press the P
Power
projector beeps twice (after about 3 seconds), you can unplug the
power cord.
(If the projector is mounted on the ceiling, you will need to wait
10 seconds for the projector to cool down before you can unplug
the power cord.)
If you want to turn the projector on again, make sure the orange
light is not flashing, then press the P
4. If you extended the adjustable front foot, press up on the blue
foot release lever to retract it.
5. Replace the lens cap.

Using the Direct Power On Function

The Direct Power On function enables faster setup. The projector will
start up automatically when you plug it in; you won't have to press the
button.
Power
P
Follow these steps to enable Direct Power On:
1. Press the button on the remote control and select the
Menu
menu.
Extended
2. Choose
Operation
3. Choose
Direct Power On
4. Highlight and press
On
5. Press or
Esc Menu
The setting will take effect the next time you plug in the projector.
button again. The lamp turns off. When the
Power
and press .
Enter
and press
Enter
.
Enter
to exit.
button.
.
Displaying and Adjusting the Image
caution
Turn the projector off when
not in use. Continuous
24-hour-a-day use may
reduce the projector's
overall life.
note
If a power outage occurs
when Direct Power On is
enabled and the projector is
plugged in, the projector will
start when the power is
restored.
27