Web Gui; Starting Rm-Cg Device Manager - Yamaha RM-CG Reference Manual

WEB GUI

Use the Web GUI "RM-CG Device Manager" to check/change the settings of this unit.
IMPORTANT: Check/change the settings after the installation of this unit is completed. For details on installing this unit, refer to the
RM-CG Installation Manual.

Starting RM-CG Device Manager

Prepare the following.
• Computer
• LAN cable
1.
Connect the computer to the network switch (where this unit is connected) with a LAN cable.
2.
Download the application "RM Device Finder" from the Yamaha website (U.S.A. and Canada: https://
uc.yamaha.com/support/, Other countries: https://download.yamaha.com/), and then start it.
3.
Select a network in the [Select Network Interface Card] window, and then click [OK].
4.
Select this unit in the [Detected Devices] window, and then click [Browse].
The first login window of RM-CG Device Manager appears.
RM-CG Reference Manual
4