Adjusting Dolby Audio Settings; Setting Video And Other Options - Epson PowerLite Presenter User Manual

Adjusting Dolby Audio Settings

You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the
Setup Page
2. Press
3. Press
can select the following settings:
■ Digital Output
Decoder to the Audio-Out port.
■ Night Mode
volume.
4. Press
5. To exit the menu, press

Setting Video and Other Options

You can use the Visual Setup menus to adjust the signal format for external video equipment
and set other options.
Option Menu
1. Press
2. Press
3. Press
You can adjust the following items:
■ Mic Input Volume:
■ Closed Caption:
provides it.
■ User Button:
Closed Caption, Power Consumption, Info, Resolution. By pressing the button, the
assigned menu item selection/adjustment screen is displayed, allowing you to make
one-touch settings/adjustments.
50
Doing More with PowerLite Presenter
button on the remote control. You see the
.
to display the
Audio Setup Page
to highlight
Digital Output
: Change to
: Turn this setting on if you are watching a Dolby Digital DVD at low
or to select the setting you want to change, then press
.
on the remote control. You see the Visual Setup menu.
to highlight
Option
until you see the option you want to set.
Adjust this setting if the microphone level is too low or too high.
Turn this setting on to display closed captioning for content that
You can assign one of the following four items to the User button:
.
or
Night Mode
if you have connected a DTS/Dolby Digital
Stream
, then press to select it.
Language
, then press to select it. You
to save it.