Choosing A Location - Epson PowerLite S4 Quick Setup Manual

Choosing a location

The projector supports 4 viewing setups. Choose the best one for
your environment. If you install the projector in a rear or overhead
position, you'll need to choose the correct projection option,
identified below, from the Extended menu. See the User's Guide
on your CD-ROM for instructions.
The distance between the projector and the screen determines the
size of the image. The diagram below shows approximately how big
your image will be, based on where you set up the projector.
4.8–6.6
3.8–5.2
2.9–3.9
Table
Convenient for temporary front projection.
Choose Front from the menu.
Ceiling
Professional installation recommended.
Choose Front/Ceiling from the menu.
Rear
For permanent installation behind a
translucent screen. Choose Rear
from the menu.
Rear/Ceiling
Professional installation behind a translucent
screen recommended. Choose Rear/Ceiling
from the menu.
Distance from projector to screen (ft.)
29.4(Wide)–39.8(Tele) ft.
19.6–26.5
9.7–13.2
7.8–10.5
5.8–7.9
(in.)