Pioneer DEH-P860XN Service Manual page 63

5
- Removing the Tuner Amp Unit (Fig.3)
1
Remove the three screws.
2
Remove the screw.
3
Straighten the tabs at three locations
indicated.
4
Remove the screw and then remove
the Tuner Amp Unit.
- Notes when assembling (Fig.4)
1
The Holder hook touches the Sub Grille Assy.
2
The hole A of Lighting Conductor is inserted in the portion shown by the arrow of Sub Grille Assy.
3
The hole B of Lighting Conductor is inserted in the portion shown by the arrow of Sub Grille Assy.
4
Please do not remove Knob as much as possible from Encoder.
2
A
4
5
6
1
Holder
Lighting Conductor
Lighting Conductor
Knob
Knob
DEH-P860MP/XN/UC
6
7
1
1
3
3
Tuner Amp Unit
Sub Grille Assy
3
1
B
4
7
8
A
2
4
B
3
C
Fig.3
D
E
F
Fig.4
63
8