Error Messages - Silvercrest SGW 860 A1 Operating Instructions Manual

16. Error messages

Error message
Extra dry op-
erating light flash-
es
The intensive pro-
gram , ECO
and quick pro-
gram oper-
ating lights are lit
up permanently
Extra dry and
ECO operating
lights flash
The intensive pro-
gram oper-
ating light flashes
quickly
Extra dry , in-
tensive program
and quick
program op-
erating lights flash
The intensive pro-
gram , quick
program and
ECO operating
lights are lit up
permanently
90 - English
Problem
No water supply detect-
ed or water supply too
slow
Too little water filled,
No water supply detect-
ed in the first three min-
utes
Wash temperature is not
reached
The appliance over-
flows/leaks.
Error display on control
panel
Insufficient water sup-
plied to the water tank
within 3 minutes.
Salt container (10) is
empty
Solution
 Flow rate measurement, drain
valve or pump failure, contact the
service department.
 Fill up the water tank until an
acoustic signal sounds.
 Then press the
start the appliance.
 Heating element/thermistor error,
contact the service department.
 Make sure that the door is closed
correctly and that the water sup-
ply and drain are connected cor-
rectly.
 Turn off the water supply.
 If water is on the appliance base
due to overfilling, remove the wa-
ter before restarting the dishwash-
er.
 Contact our Service Centre.
 Fill up the water tank with more
water until a quick acoustic signal
sounds.
 Then press the
start the appliance.
 Replenish the salt container (10)
button (13) to
button (13) to