Sony Airpeak S1 Help Manual page 40

Connect the control cable (aircraft — gimbal) (
Insert fully until the plug locks into place.
Rear of aircraft
Connect the power cable (aircraft — gimbal) (
Insert fully until the plug locks into place.
Connect the USB Type-C
Note
Tighten the screws firmly using the hex wrench included in the gimbal set (sold separately). Otherwise, the screws may loosen
and detachment may occur during flight.
When using tools other than the hex wrench included in the gimbal set (sold separately), be sure to tighten the screws with a
torque of 1.5±0.5 Nm.
Related Topic
Mounting the gimbal on the aircraft
) to the control port (
) to the POWER port (
®
cable (aircraft — gimbal) (
5-027-737-11(1) Copyright 2021 Sony Group Corporation
).
).
) to the USB port (
40
).