Dmz - D-Link DSL-G604T User Manual

Wireless adsl router
Hide thumbs Also See for DSL-G604T:
Table of Contents

Advertisement

Netmask
Gateway
Connection
Click Apply to set the routing information configured.

DMZ

Firewalls may conflict with certain interactive applications such as video conferencing or playing
Internet video games. For these applications, a firewall bypass can be set up using a DMZ IP address.
The DMZ IP address is a "visible" address and does not benefit from the full protection of the firewall
function. Therefore it is advisable that other security precautions be enabled to protect the other
computers and devices on the LAN. It may be wise to use isolate the device with the DMZ IP address
from the rest of the LAN. For example, if you want to use video conferencing and still use a firewall,
you can use the DMZ IP address function. In this case, you must have a PC or server through which
video conferencing will take place. The IP address of this PC or server will then be the DMZ IP
address. You can designate the server's IP address as the DMZ by typing in the IP address in the IP
Address space provided and then enabling its status by clicking the Enabled radio button and then
click Apply. For the system that uses the DMZ IP address, you may want to manually assign an IP
address to it and adjust your DHCP server addresses so that the DMZ IP address is not included in the
DHCP server range. This way you avoid possible IP address problems if you reboot the DMZ system.
To configure the Router's DMZ IP address, click the Advanced tab at the top of the screen and then
the DMZ tab to the left.
DSL-G604T Wireless ADSL Router Manual
Enter the Subnet Mask to be used for static routing.
Enter the gateway device's IP address. This is an IP address of a device that will
allow the user to contact the remote network or Host IP address. This field cannot be
configured or used if the following field, Connection, has been selected.
Choose a PVC from the corresponding pull-down menu to be used for static routing.
This field cannot be configured or used if the previous field, Gateway, has been
selected.
76

Advertisement

Table of Contents
loading

Table of Contents