Advertisement
The video output connection is made via a BNC connector on the side of the unit. The
75Ω video output can be connected to any VD-2 protocol video monitoring device. For
proper operation, the output must be terminated with 75Ω. For optimum performance the
video cable should be the shortest length of coax practical.
MRM-1600P STATUS INDICATOR
The MRM-1600P transmitter provides the following LED status indicator to aid in
installation and troubleshooting:
OLI
A bi-color LED indicator monitors the optical input power of the video signal that is being
received at the MRM-1600P from the MTM-1600P or the RTM-1600P. DC power and
optical input status associated with this LED are summarized below.
Optical Level Indicator
Green
Red
Off
DC Power Status
On
On
Off
3
Optical Status
Proper Optical Input Power Present
Optical Input Not Detected
Check Power Supply
Advertisement
