Making and Answering Calls
Making Calls
To place a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number from standby mode. (If you make a
mistake while dialing, press
Press and hold
3. Press
or
4. When you're finished, press
Tip:
To redial your last outgoing call, press
Important:
When you use your phone to maximize performance, extend
the antenna and do not touch the antenna.
Correct
To place a call with the flip closed:
1. Make sure your phone is on.
2. Press and hold
3. Follow the system prompts. (The call will be made in
speakerphone mode, unless you have a headset attached to
the phone.)
Say the name of your registered Voice Dial entry (see the note
below) or press
Note:
To use a Voice Dial, you must have stored Voice Dial entries. (See
"Programming Voice Dial Tag to Your Phone" on page 82.)
Note:
This function is available only when the Side Key Guard setting is
off. To temporarily deactivate the feature, see "Setting the Side Key
Guard" on page 47.
to erase the entire number.)
.
Incorrect
on the left side of the phone.
again to redial.
to erase one digit at a time.
.
or
twice.
11