Table of Contents
Advertisement
Using the "Options" Menu
Options 1
1
Overscan H
1
Overscan V
2
Subtitle
3
OSD Display
4
Video System
5
Signal Type
HDMI Setting
6
7
Background
8
Auto Power Off
9
Lamp Timer(Life)
SEL./ADJ.
RETURN
Settings on the Options 1 menu
1 Adjusting the Overscan
1
1
1
1
This function allows you to adjust the Overscan
area ratio (display area ratio).
O button
Orientation
Overscan H
Reduces the
(Horizontal)
image.
(The display
Overscan V
area ratio
(Vertical)
becomes larger.)
Note
• This function can only be adjusted when a
video, S-video, or Component signal is input.
• If the display area ratio is set too large, noise
may appear at the screen edges. If this hap-
pens, set the display area ratio to a smaller value.
• When "Resize" is set to "CINEMA ZOOM",
depending on the input signal, "Overscan V"
may not be adjustable.
• Also read "About Copyrights" on page 37.
INPUT 1
0
0
0
On
Auto
Auto
Standard
Blue
On
0
h
100%
ENTER
END
Q button
Enlarges the
image.
(The display area
ratio becomes
smaller.)
Menu operation n Page 41
2 Adjusting the Vertical Size of
2
2
2
2
the Display (Subtitle Setting)
With this function, you can adjust the vertical size
of the display to allow for subtitles.
O button
The image is compressed by adjusting
the vertical size of the display.
Q button
The image is enlarged by adjusting the
vertical size of the display.
Note
• When changing the screen with the Subtitle set-
ting, not only the bottom of the screen rises, but
also the upper part is changed to a certain point.
• The Subtitle setting can be adjusted more ef-
fectively with the Overscan function.
• The Subtitle setting only works when "Resize"
is set to "CINEMA ZOOM".
• The adjustment area changes according to the
input signal.
47
Advertisement
Table of Contents
