For Windows ® Users With Usb Only - Brother HL-1030 Quick Setup Manual

For Windows
only
(Windows
If you don't have a CD-ROM drive, follow the instructions in this section.
Step 1 Install the drum unit assembly
1. Open the front cover.
2. Unpack the drum unit assembly. Rock it from side to side 5 or 6 times to
distribute the toner evenly inside the cartridge.
3. Install the drum unit assembly into the printer.
4. Push it fully into the printer until it snaps into place.
5. Close the front cover.
Step 2 Load paper into the paper cassette
1. Pull the paper cassette completely out of the printer.
2. Slide the paper width and length adjusters to the paper size you want until they
snap into a slot.
3. Load paper into the paper cassette. Check that the paper is flat in the tray.
4. Re-install the paper cassette into the printer.
®
users with no CD-ROM drive
®
3.1x, 95/98)