Sanyo PLC-SP20 Owner's Manual page 2

Hide thumbs Also See for PLC-SP20:
Table of Contents

Advertisement

As the owner of a new Multi-media Projector, you are probably eager to try out your new projector. Before you do, we suggest
that you spend a little time reading this manual to familiarize yourself with the operating procedures, so that you will receive
maximum satisfaction from the many features included in your new projector.
This owner's manual will acquaint you with your projector's features. Reading it will help us too. Through the years, we have
found that many service requests were not caused by problems with our projectors. They were caused by problems that
could have been prevented, if the owner had followed the instructions in the manual.
You can often correct operating problems yourself. If your projector fails to work properly, see "TROUBLESHOOTING"
section on pages 49 ~ 50 and try the solutions marked for each problem.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Intense light source. Do not stare directly into the projection lens as possible eye damage could result.
Be especially careful that children do not stare directly into the beam.
If the Projector will not be used for an extended time, unplug the new Projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
IMPORTANT:
For your protection in the event of theft or loss of this LCD projector,
please record the Model Number and Serial Number located on the
rear of unit and retain this information. Refer to these numbers
whenever you call upon your authorized dealer regarding this
product.
Do not discard shipping carton and packing materials.
These items may be needed for storage or future servicing.
TO THE OWNER
SAFETY PRECAUTIONS
– 2 –
Model No:
Serial No:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-sp20e

Table of Contents