NEC MultiSync LCD1570NX User Manual page 8

Raise and Lower Monitor Screen
The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to
the desired height (Figure RL.1).
NOTE: Handle with care when raising or lowering the monitor screen.
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).
NOTE: Handle with care when tilting and swivelling the monitor screen.
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure S.1).
2. Disconnect all cables.
3. Place hands on each side of the monitor to tilt the LCD panel -5 degree angle (Figure S.2).
4. Remove the hinge cover (Figure S.3).
Figure S.1
Figure RL.1
Figure TS.1
-5˚ Tilt
Highest
Stand
Position
Figure S.2
English-6
Figure S.3