Installing Or Replacing A Pci Card - Lenovo ThinkCentre 7522 User Manual

6. Position the memory module over the memory slot. Make sure that the notch
Figure 9. Installing the memory module

Installing or replacing a PCI card

This section provides instructions on how to install or replace a PCI card.
Your computer has one standard PCI card slot and one PCI Express x16 graphics
card slot.
To install or replace a PCI card:
1. Open the computer cover. See "Opening the computer cover" on page 14.
2. Rotate the card retainer to the open position.
3. Remove the new PCI card from its static-protective package.
18
User Guide
1 on the memory module aligns correctly with the slot key 2 on the system
board. Push the memory module straight down into the slot until the retaining
clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Completing the parts replacement" on
page 37.
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support