Page 1
Operating Instructions for Advanced Features Digital Camera DMC-FS42 Model No. DMC-FS4 Before connecting, operating or adjusting this product, please read the instructions completely. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.
Page 2
Before Use Dear Customer, Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. - -...
Before Use Information for Your Safety Carefully observe copyright laws. Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.
Page 4
Before Use Care of the camera • Do not strongly shake or bump the camera by dropping it etc. This unit may malfunction, recording pictures may no longer be possible or the lens or the LCD monitor may be damaged. •...
Before Use Contents • To delete a single picture ....40 Before Use • To delete multiple pictures Information for Your Safety ......3 (up to 50) or all the pictures ..... 41 Quick Guide ..........7 Standard Accessories....... 8 Advanced-Shooting Names of the Components .......
Page 6
Before Use • g [PICTURE SIZE] ......70 Connecting to other equipment • h [QUALITY] ......... 71 Connecting to a PC ........ 96 • j [SENSITIVITY] ......71 • Using a PC with an SD Memory • k [WHITE BALANCE] ....72 Card slot or a card reader ....
Before Use Quick Guide This is the overview of the procedure to record pictures with this camera. For each operation, be sure to refer to the corresponding pages. Charge the battery. (P11) plug-in type inlet type • The battery is not charged when the camera is shipped.
• If any of the accessories are lost, customers in the USA and Puerto Rico should contact Panasonic’s parts department at 1 800 833-9626 and customers in Canada should contact 1 800 99-LUMIX (1-800-995-8649) for further information about obtaining replacement parts.
Before Use Names of the Components 1 Zoom lever (P35) 2 Shutter button (P29) 3 Camera ON/OFF switch (P18) 4 Microphone (P62) 5 Speaker (P25, 83) 6 Self-timer indicator (P50) AF assist lamp (P78) 7 Flash (P44) 8 Lens part 9 Lens barrel 10 LCD monitor (P42, 121) 11 Recording/playback switch (P20)
Page 10
DIGITAL 20 Card/Battery door (P14) 21 DC coupler cover (P15) • When using an AC adaptor, ensure that the Panasonic DC coupler (optional) and AC adaptor (optional) are used. For connection details, refer to P15. 22 Release lever (P14)
To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. • Use the dedicated charger and battery.
Page 12
Preparation Note • After charging is completed, be sure to disconnect the power supply device from the electrical outlet. • The battery becomes warm after using it, and while and after charging. The camera also becomes warm during use. This is not a malfunction. •...
Recording conditions by CIPA standard • Temperature: 23 °C (73.4 °F)/Humidity: 50% when the LCD monitor is on. • Using a Panasonic SD Memory Card (32 MB) • Starting recording 30 seconds after the camera is turned on. • Recording once every 30 seconds, with full flash every second recording.
Inserting/Removing the Battery/Card (Optional) • Check that the camera is turned off. • We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries.
Page 15
Using any other equipment may cause damage. Note • Always use a genuine Panasonic AC adaptor (optional). • Some tripods cannot be attached when the DC coupler is connected. • Make sure to unplug the AC adaptor when you open the card/battery door.
Preparation About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back.
Page 17
• You can only use cards with SDHC logo (indicating compliance with the SD standard) if using cards with 4 GB or more capacity. • Please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This Site is in English only.) Note •...
Preparation Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. Turn the camera on. A [MENU/SET] button B Cursor buttons • (When the language select screen is not displayed " step 4 ) Press [MENU/SET]. Press e / r to select the language, and press [MENU/SET].
Page 19
Preparation Changing the clock setting 1 Press [MENU/SET] in Normal Picture Mode. 2 Press e/r to select [CLOCK SET]. 3 Press q and perform steps 5 and 6 for setting. 4 Press [MENU/SET] to close the menu. • You can also set the clock in the [SETUP] menu. (P25) Note •...
Preparation About the Mode and Menu Operation Mode switching Slide the recording/playback switch A to (right) or (left). 1 : Recording Mode 5 : Playback Mode Press [MODE] to display the mode selection screen. (Example: Normal Picture Mode) Press e / r to select a mode and press [MENU/SET] to close the menu. Refer to corresponding page for more details on each mode.
Preparation List of Recording Modes ; Auto Scene Mode Taking pictures easily. 1 Normal Picture Mode Taking pictures in the desired setting. 5 Scene Mode Taking pictures according to the scene. This mode allows you to record motion 6 Motion Picture Mode pictures with audio.
Page 22
Preparation How to use the menu Press [MENU/SET] to display the menu. • You can switch menu screens by the page from any menu item by rotating the zoom lever. (Example: Selecting the Normal Picture Mode [ 1 ]) Press e / r to select a menu item.
Page 23
Preparation Switching to the [SETUP] menu When the camera shows the menu screen after step 1 on “How to use the menu” (P22): 1 Press w to move the menu icon. 2 Press r to select the [SETUP] menu icon [e]. 3 Press q to move to the menu item list.
Preparation Using the quick menu Using the quick menu, some of the menu items can be easily found. • Some of the menu items cannot be set by the modes. Press and hold [Q.MENU] when the camera is in the Recording Mode. Q.MENU Press e / r / w / q to select the menu item and its setting and then press [MENU/...
Preparation Perform these settings if you need to. About the [SETUP] Menu [CLOCK SET], [POWER SAVE] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Auto Scene Mode, only [CLOCK SET], [WORLD TIME], [BEEP] and [LANGUAGE] can be set.
Page 26
Preparation Saves the battery consumption. The camera is automatically turned off if the camera has P [POWER SAVE] not been used for the time selected on the setting. [OFF]/[2MIN.]/[5MIN.]/[10MIN.] • Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
Page 27
1-800-211-PANA (7262) or, 1-800-99-LUMIX (1-800-995-8649) or contact us via the web at: send e-mail to: http://www.panasonic.com/contactinfo lumixconcierge@ca.panasonic.com 9 [LANGUAGE] Set the language displayed on the screen. • When you set to other language by mistake, select [9] from the menu icons to set the desired language.
Basic Recording Mode: ; Taking Pictures Using the Automatic Function (Auto Scene Mode) The camera automatically sets the appropriate settings according to the subject and recording condition. This mode is recommended for beginners to take pictures easily. • The following functions are activated automatically.
Page 29
Basic Press the shutter button halfway to focus. • Refer to “Focusing” (P33) for details. • The focus indication E lights green when the subject is focused. • The AF area F is displayed around the subject’s face by the face detection function. In other cases, it is displayed at the point on the subject which is in focus.
Basic Scene detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red. ; " 3 [i-PORTRAIT] 4 [i-SCENERY] 2 [i-MACRO] 5 [i-NIGHT PORTRAIT] •...
Basic About the flash • When [ q ] is selected, [ w ], [ e ] or [ r ] is set depending on the type of subject and brightness. • When [ e ] or [ r ] is set, the flash is activated twice. Settings in AUTO Scene mode Only the following functions can be set in this mode.
Basic Recording Mode: 1 Taking Pictures with Your Favorite Settings (Normal Picture Mode) This mode allows you to take pictures freely as more options are available than Auto Scene Mode [ ; ] (P28). Slide the recording/playback switch to [ and press [MODE].
Basic To adjust the exposure and take pictures at times when the image appears too dark (P51) To adjust the colors and take pictures at times when the image appears too red (P72) Focusing Aim the AF area at the subject, and then press the shutter button halfway. Focus When the subject When the subject...
Basic Subjects and recording conditions which are difficult to focus • Fast-moving subjects, extremely bright subjects or subjects without contrast • When recording subjects through windows or near shiny objects • When it is dark or when jitter occurs •...
To make subjects appear even closer [maximum of 7.1× (DMC-FS42)/6.4× (DMC-FS4)], set the [PICTURE SIZE] to 5M or less. Even higher levels of magnification are possible when [DIGITAL ZOOM] is set to [ON] in [REC] menu.
Page 36
When you set the picture size to [ C ] (3 million pixels), the 10M (10.1 million pixels) (DMC-FS42)/8M (8.1 million pixels) (DMC-FS4) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect.
Basic Playback Mode: 9 Playing Back Pictures (Normal Playback Mode) Slide the recording/playback switch A to [ 5 ]. • Normal playback is set automatically in the following cases: – When the mode was switched to the Playback Mode. – When the camera was turned on while the recording/ playback switch was at [5].
Basic Displaying multiple screens (Multi Playback) Rotate the zoom lever towards [ 6 ] (W). 1 screen"12 screens"30 screens"Calendar screen display (P84) A Number of the selected picture and the total number of recorded pictures • Rotate the zoom lever towards [7] (T) to return to the previous screen.
Basic Using the playback zoom Rotate the zoom lever towards [ ] (T) to enlarge the picture. 1 "2 "4 "8 "16 • When you rotate the zoom lever towards [6] (W) after enlarging the picture, the magnification becomes lower.
Basic Playback Mode: 9 z Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card, which are being played back, will be deleted. To delete a single picture Select the picture to be deleted, and then press [ 4 ].
Basic To delete multiple pictures (up to 50) or all the pictures Press [ 4 ]. Press e / r to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. • [DELETE ALL] " step 5 . Press e / r / w / q to select the picture and then press [DISPLAY] to set.
Advanced-Shooting About the LCD Monitor Press [DISPLAY] to switch the screen to be used. A LCD monitor • When the menu screen appears, the [DISPLAY] button is not activated. • During playback zoom, while playing back motion pictures and during a slide show, you can only select “Normal display”...
Advanced-Shooting Display in large size Select [LARGE] in the [DISPLAY SIZE] in [SETUP] menu. (P25) • In the Recording Mode, Recording Mode icon is displayed in large size. • In the menu screen, the items you selected will be displayed in large size. Recording Screen Menu Screen - -...
Advanced-Shooting Recording Mode: ; 1 5 Taking Pictures Using the Built-in Flash A Photo flash • Do not cover the photo flash with your fingers or any other items. Switching to the appropriate flash setting Set the flash to match the recording. Press q [ t ].
Page 45
Advanced-Shooting Item Description of settings q : AUTO The flash is automatically activated according to the recording condition. The flash is automatically activated according to the recording condition. It is activated once before the actual recording to reduce the red-eye @ : AUTO/Red-eye phenomenon (eyes of the subject appearing red in the picture) and ...
Page 46
Advanced-Shooting Available flash settings by Recording Mode The available flash settings depend on the Recording Mode. ( ○ : Available, — : Not available, ◎ : Scene Mode initial setting) ; ○ ○ ○ ◎ ○ ○ 2 —...
Page 47
Advanced-Shooting The available flash range to take pictures • The available flash range is an approximation. Available flash range sensitivity Wide Tele i.AUTO 30 cm (0.99 feet) to 6.3 m (20.67 feet) 50 cm (1.64 feet) to 3.0 m (9.84 feet) ISO80 30 cm (0.99 feet) to 1.7 m (5.85 feet) 50 cm (1.64 feet) to 0.8 m (2.62 feet)
Page 48
Advanced-Shooting Shutter speed for each flash setting Flash setting Shutter speed (Sec.) q : AUTO 1/30 to 1/2000 @ : AUTO/ Red-eye reduction 1/30 to 1/2000 t : Forced ON 1/30 to 1/2000 ` : Forced ON/Red-eye reduction [ : Slow sync./Red-eye reduction 1/8 to 1/2000 ...
Advanced-Shooting Recording Mode: 1 6 Taking Close-up Pictures This mode allows you to take close-up pictures of the subject, e.g. when taking pictures of flowers. You can take pictures approaching the subject at a distance up to 5 cm (0.17 feet) from the lens by rotating the zoom lever upmost to Wide (1 ×).
Advanced-Shooting Recording Mode: ; 1 5 Taking Pictures with the Self-timer Press w [ s ]. Press e / r to select the time. • You can also press w [ s ] to select. Press [MENU/SET]. • You can also press the shutter button halfway to finish. •...
Advanced-Shooting Recording Mode: 1 5 6 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background. Properly Underexposed Overexposed exposed Compensate the exposure toward Compensate the exposure toward positive.
Advanced-Shooting Recording Mode: 5 Taking Pictures that Match the Scene being Recorded (Scene Mode) When you select a Scene Mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. Slide the recording/playback switch to [ 1 ].
Advanced-Shooting q [PORTRAIT] The person stands out with a healthier complexion. Technique for Portrait Mode To make this mode more effective: 1 Rotate the zoom lever to Tele as far as possible. 2 Move close to the subject. Note •...
Advanced-Shooting r [SCENERY] The camera focuses on distant subjects to allow you to take pictures of wide landscapes. Note • Flash is fixed to Forced flash OFF [ o ]. • The focus range is 5 m (16.41 feet) to 7. t [SPORTS] Allows you to shoot fast moving subjects (e.g.
Advanced-Shooting u [NIGHT SCENERY] The nightscape can be recorded vividly. Technique for Night Scenery Mode • The shutter speed may slow down up to 8 seconds. We recommend using the tripod and the self-timer for best results. Note • Flash is fixed to Forced flash OFF [ o ]. •...
Advanced-Shooting o [PARTY] Use to take pictures at wedding receptions, indoor parties, etc. Both the people and the background can be shot with natural brightness using the flash and slow shutter speed. Technique for Party Mode • Use the flash. (You can set to [ [ ] or [ ` ].) •...
Advanced-Shooting a [BABY1] / s [BABY2] This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual. It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P87).
Advanced-Shooting d [PET] Suitable for taking pictures of your pet. This allows you to set the birthday (age) and name of your pet. For details on how to set age and birthday, see [BABY1]/[BABY2]. (P57) Note • [i.AUTO] is activated. •...
• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size. 2 Take pictures. • Still pictures are taken continuously while the shutter button is pressed fully. DMC-FS42: approx. 6 pictures/second Maximum Burst speed DMC-FS4: approx. 5.5 pictures/second ...
Advanced-Shooting c [STARRY SKY] Take clear pictures of the night sky or other dark subjects. Setting the shutter speed Choose a shutter speed; 15, 30, or 60 seconds. 1 Press e/r to select the shutter speed and then press [MENU/ SET].
Advanced-Shooting b [BEACH] Prevents underexposure of the subject under strong sunlight to allow you to take pictures on a beach. Note • The initial setting for [AF MODE] is [ 3 ]. • Do not touch the camera with wet hands. •...
Advanced-Shooting Recording Mode: 6 Motion Picture Mode Slide the recording/playback switch to [ 1 ]. Press [MODE] to display the mode selection screen. Press e / r to select [MOTION PICTURE] and then press [MENU/SET]. Press the shutter button halfway to focus and then press it fully to start recording.
Page 63
Advanced-Shooting Changing the settings for the picture quality When you set the picture quality to [WVGA] or [VGA], we recommend using a high-speed card with “10MB/s” or greater displayed on the package for shooting motion pictures. Press [MENU/SET]. Press e / r to select [REC QUALITY] and then press q .
Page 64
• This camera has improved sound quality so motion pictures recorded on this camera cannot be played back on a Panasonic Digital Camera (LUMIX models) that was sold in June 2008 or before. (However, motion pictures recorded on previous models can be played back on this camera.)
Advanced-Shooting Recording Mode: ; 1 5 6 Useful Functions at Travel Destinations Recording which day of the vacation you take the picture If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture.
Page 66
Advanced-Shooting Press e / r / w / q to set the return date (year/month/ day), and then press [MENU/SET]. • If you do not want to set the return date, press [MENU/SET] while the date bar is displayed. Press r to select [LOCATION] and then press q . Press r to select [SET] and then press [MENU/ SET].
Page 67
Advanced-Shooting Canceling the travel date The travel date is cleared if the current date is after the return date. If you want to cancel part way through the setting, select [OFF] in step 3 or 7 and press [MENU/SET] twice. If the [TRAVEL SETUP] is set to [OFF] in step 3 , [LOCATION] will be also set to [OFF].
Advanced-Shooting Recording date/time at overseas travel destinations (World time) You can display the local time at the travel destinations and record them on the pictures you take. • Select [CLOCK SET] to set the current date and time in advance. (P18) Select [WORLD TIME] from the [SETUP] menu, and then press q .
Page 69
Advanced-Shooting Press e to select [DESTINATION] and then press [MENU/SET]. C Depending on the setting, the time at the travel destination area or the home area is displayed. Press w / q to select the area the travel destination is in and then press [MENU/SET] to set.
16:9 [6M] 3264 × 1840 pixels 16:9 [2M P ] 1920 × 1080 pixels 1 DMC-FS42 2 DMC-FS4 3 Cannot be set in Auto Scene Mode [ ; ] [ + ]: aspect ratio of a 4:3 TV or PC [ * ]: aspect ratio of a 35 mm film camera [ } ]: aspect ratio of a high-definition TV, etc.
Advanced-Shooting h [QUALITY] For details on [REC] menu settings, refer to P21. Set the compression rate at which the pictures are to be stored. Applicable modes: 1 5 [ h ]: Fine (when giving priority to the picture quality) [ 8 ]: Standard (when giving priority to the number of pictures to be recorded without changing the number of pixels) Note •...
Advanced-Shooting k [WHITE BALANCE] For details on [REC] menu settings, refer to P21. This function allows you to reproduce a white color closer to the tone in real life on the pictures recorded under sunlight, halogen lighting, etc. in which the white color may appear reddish or bluish.
Page 73
Advanced-Shooting Auto White Balance (AWB) Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a color close to white, Auto White Balance may not function properly. In a case like this, set the white balance to a mode other than [AWB].
Advanced-Shooting $ [AF MODE] For details on [REC] menu settings, refer to P21. This allows the focusing method that suits the positions and number of the subjects to be selected. Applicable modes: 1 5 [ 3 ]: Face detection The camera automatically detects the person’s face.
Page 75
Advanced-Shooting About [ 3 ] (Face detection) The following AF area frames are displayed when the camera detects faces: Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF areas are also focused.
For details on [REC] menu settings, refer to P21. When you press and hold the shutter button several pictures are taken in succession. Applicable modes: ; 1 5 [OFF] & Burst speed (DMC-FS42) Approx. 1.7 (DMC-FS42) — (pictures/second) (DMC-FS4) Approx. 2 (DMC-FS4) Max. 3 (DMC-FS42) —...
Advanced-Shooting ' [DIGITAL ZOOM] For details on [REC] menu settings, refer to P21. This can enlarge subjects even more than the optical zoom or extended optical zoom. Applicable modes: 1 5 6 [OFF]/[ON] Note • Refer to for details. • When the Digital zoom is [ON], the motion detection does not function in [i.AUTO] setting. ( [COLOR MODE] For details on [REC] menu settings, refer to P21.
Advanced-Shooting W [AF ASSIST LAMP] For details on [REC] menu settings, refer to P21. Illuminating the subject with the AF assist lamp allows the camera to focus on the subject in low light conditions. Applicable modes: 1 5 [OFF]: The AF assist lamp does not turn on. [ON]: When taking pictures in dark places, the AF assist lamp lights while the shutter button is pressed halfway.
Advanced-Viewing Playback Mode: 8 Playing Back Pictures in Sequence (Slide Show) You can play back the pictures you have taken in synchronization with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. Furthermore, you can play back only those pictures you have set as favorites as a slide show.
Page 80
Advanced-Viewing Operations performed during slide show The cursor displayed during playback corresponds to e/r/w/q. • The menu screen is restored when [4] is pressed. A Play/Pause B Stop C Back to previous picture D Ahead to next picture ...
Page 81
Advanced-Viewing Changing the slide show settings You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen. [EFFECT] This allows you to select the screen effects or music effects when switching from one picture to the next picture.
Advanced-Viewing Playback Mode: z Selecting Pictures and Playing Them Back z [FAVORITE PLAY] You can play back the pictures put in the favorites list only. (When [FAVORITE] is set to [ON] and there is more than one picture in the favorites list.) Refer to [FAVORITE] (P91) to put a picture on your favorites list or to remove it from the list.
Advanced-Viewing Playback Mode: 9 z Playing Back Motion Pictures Press w / q to select a picture with a motion picture icon (such as [ - ]), and then press e to play back. A The motion picture recording time B Motion picture icon C Motion picture playback icon •...
Advanced-Viewing Playback Mode: 9 Using the [PLAYBACK] Menu You can use various functions in Playback Mode to rotate pictures, set protection for them etc. • With [TEXT STAMP] or [RESIZE], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture.
Advanced-Viewing y [TITLE EDIT] You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P87). (Only alphabetical characters and symbols can be entered.) Select [TITLE EDIT] on the [PLAYBACK] menu. (P21) Press e / r to select [SINGLE] or [MULTI] and then press [MENU/SET].
Page 86
Advanced-Viewing Delete the title [SINGLE] setting In step 4 , delete all the texts, select [EXIT], and press [MENU/SET]. Press [4]. Press [MENU/SET] to close the menu. [MULTI] setting In step 4 , delete all the texts, select [EXIT], and press [MENU/SET]. Press [MENU/SET] to close the menu.
Advanced-Viewing s [TEXT STAMP] You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures larger than 3M will be resized when stamping the date etc. on them.) Select [TEXT STAMP] on the [PLAYBACK] menu.
Page 88
Press [MENU/SET]. • If you set [TEXT STAMP] for a picture larger than 3M, the picture size will become smaller as shown below DMC-FS42: E / T " C DMC-FS4: R / T " C Y " M Z " M K "...
Advanced-Viewing f [RESIZE] Reducing the picture size (number of pixels) This function is useful if you want to reduce the file size of the picture in cases when it needs to be attached to an e-mail or uploaded to a website. Select [RESIZE] on the [PLAYBACK] menu.
Advanced-Viewing j [ROTATE] This mode allows you to rotate pictures manually in 90° increments. Select [ROTATE] on the [PLAYBACK] menu. (P21) Press w / q to select the picture and then press [MENU/SET] . • Motion pictures and protected pictures cannot be rotated. Press e / r to select the direction to rotate the picture and then press [MENU/SET].
Advanced-Viewing z [FAVORITE] You can do the following if a mark [z] has been added to pictures and they have been set as favorites. • Play back the pictures set as favorite. ([FAVORITE PLAY]) • Play back only the pictures set as favorites as a slide show. •...
When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P95) and then set the print setting. For more information please visit: http://panasonic.jp/dc/dpof_110/white_e.htm Select [PRINT SET] on the [PLAYBACK] menu. (P21) Press e / r to select [SINGLE] or [MULTI] and then press [MENU/SET].
Page 93
Advanced-Viewing Canceling all the [PRINT SET] settings Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. Press e to select [YES] and then press [MENU/SET]. Press [MENU/SET] to close the menu. • You cannot select [CANCEL] if no picture has been set for printing. To print the date ...
Advanced-Viewing c [PROTECT] You can set protection for the pictures you do not want to delete to prevent them from accidental erasure. Select [PROTECT] on the [PLAYBACK] menu. (P21) Press e / r to select [SINGLE] or [MULTI] and then press [MENU/SET].
• It may take time to copy the picture data. • Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited on a PC.) •...
Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of doing this.
Page 97
Connecting to other equipment Press e / r to select [PC], and USB MODE PLEASE SELECT then press [MENU/SET]. THE USB MODE ACCESS Double-click on [Removable SELECT Disk] in [My Computer]. • When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME”...
Connecting to other equipment Disconnecting the USB connection cable safely • Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.
Connecting to other equipment Printing the Pictures By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures in the built-in memory.
Connecting to other equipment Press e / r to select [PictBridge(PTP)], and then USB MODE press [MENU/SET]. PLEASE SELECT THE USB MODE SELECT Note • We recommend placing a soft cloth under this unit to prevent scratching. • Turn the camera off before connecting or disconnecting the AC adaptor (optional). •...
Connecting to other equipment Selecting multiple pictures and printing them Press e . Press e / r to select an item and then press [MENU/ MULTI SELECT SET]. SELECT ALL PRINT SET(DPOF) • If the print check screen has appeared, select [YES], and FAVORITE print the pictures.
Connecting to other equipment Print Settings Select and set the items on the screen in step 2 of the “Selecting a MULTI SELECT single picture and printing it” or in step 3 of the “Selecting multiple PRINT START pictures and printing them”. PRINT WITH DATE NUM.OF PRINTS •...
Page 103
Connecting to other equipment [PAPER SIZE] Item Description of settings Item Description of settings Settings on the printer [A3] 297 mm × 420 mm are prioritized. [L/3.5˝ × 5˝ ] [10 × 15 cm] 89 mm × 127 mm 100 mm × 150 mm [2L/5˝...
Connecting to other equipment [PAGE LAYOUT] (Layouts for printing that can be set with this unit) Item Description of settings Settings on the printer are prioritized. 1 page with no frame print 1 page with frame print 2 pages print on 1 page 4 pages print on 1 page •...
Turn this unit and the TV off. • Do not use any other AV cables except the supplied one. (Only for DMC-FS42PU/ DMC-FS4PU/DMC-FS42PR/DMC-FS4PR/DMC-FS42GC/DMC-FS4GC/DMC-FS42GJ/ DMC-FS4GJ). • Do not use any other cables except a genuine Panasonic AV cable (DMW-AVC1: optional). (Only for DMC-FS42P/DMC-FS4P/DMC-FS42PC/DMC-FS4PC/DMC-FS42EF/ DMC-FS4EF/DMC-FS42EB/DMC-FS4EB/DMC-FS42GN/DMC-FS4GN) AV OUT...
Connecting to other equipment Note • Depending on the [PICTURE SIZE], black bands may be displayed on the top and bottom or the left and right of the pictures. • Read the operating instructions for the TV. • When you play back a picture vertically, it may be blurry. •...
Others Cautions for Use Optimal use of the camera Take care not to drop or knock the unit or put a lot of pressure on it. • Take care not to knock or drop the bag/case that you inserted the camera in as the shock may cause damage to the camera, lens or LCD monitor.
Page 111
Others Maintenance Before cleaning the camera, remove the battery or the DC coupler (optional), or disconnect the power plug from the outlet. Then wipe the camera with a dry soft cloth. • When the camera becomes dirty, clean it with a soft, slightly damp cloth. Then wipe the camera with a dry cloth.
Page 112
Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter.
Page 113
• Information containing private information may be changed or lost due to operation mistake, static electricity, accident, malfunction, or repair. Panasonic assumes no liability for direct/indirect damage resulting from change or loss of information including private information. For service or transfer/disposal •...
Page 114
About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage suffered due to loss of recorded data. About tripods • When you use a tripod, make sure the tripod is stable when this unit is attached to it.
Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [THIS MEMORY CARD IS LOCKED] " The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK].
Page 116
Others [NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE CARD] • There is no space left on the built-in memory or the card. – When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
Page 117
[THIS BATTERY CANNOT BE USED] • The battery cannot be recognized by the camera. " Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or your nearest Service Center.
Others Troubleshooting First, try out the following procedures (P118–126). If the problem is not resolved, it may be improved by selecting [RESET] (P26) on the [SETUP] menu when taking pictures. Battery and power source The camera cannot be operated even when it is turned on. •...
Others Shooting The picture cannot be recorded. • Is the mode correctly set? (P20) • Is there any memory capacity left on the built-in memory or the card? " Before recording, delete some pictures. (P40) The recorded pictures are pale. •...
Page 120
Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (When set to [i.AUTO], ISO sensitivity increases for indoor and other shooting occasions.) " Reduce ISO sensitivity. (P71) "...
Others LCD monitor The LCD monitor turns off although the camera is turned on. • When the camera is not operated for a while, [POWER SAVE] is activated. (P26) [This does not happen when using the AC adaptor (optional).] If the remaining battery power is low, it may take longer for the flash to be charged, and the time during which the LCD monitor is turned off may become longer.
Others Flash Flash is not activated. • Is the flash setting set to Forced OFF [ o ]? " Change the flash setting. (P44) • Flash Mode is not available when [BURST] (P76) in [REC] menu has been set. • Flash is not available depending on Scene Mode. (P46) The flash is activated several times.
Page 123
Others White round spots like soap bubbles appear on the recorded picture. • If you take a picture with the flash in a dark place or indoors, white round spots may appear on the picture caused by the flash reflecting of particles of dust in the air. This is not a malfunction. A characteristic of this is that the number of round spots and their position differ in every picture.
Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? " Set the TV to Video Input Mode. (P105) The display areas on the TV screen and the camera’s LCD monitor are different. •...
Others Others An unreadable language was selected by mistake. " Press [MENU/SET], select the [SETUP] menu icon [e] and then select the [9] icon to set the desired language. (P27) When the shutter button is pressed halfway, a red lamp turns on sometimes. •...
Page 126
Others File numbers are not created in order. • Certain operations cause pictures to be saved in folders with different numbers. (P98) The file numbers are recorded in ascending order. • If the battery is inserted or removed without first turning the camera’s power off, the folder and file numbers for the pictures taken will not be stored in the memory.
(These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time vary depending on the subjects. 1 2 Number of recordable pictures ( DMC-FS42, DMC-FS4) 1 2 4:3 [10M]...
Page 130
Others Available recording time (In Motion Picture Mode) Picture quality WVGA QVGA setting Built-in Memory — — 1 min 37 s (Approx. 50 MB) 32 MB 16 s 17 s 56 s 64 MB 37 s 39 s 1 min 58 s 128 MB 1 min 18 s 1 min 22 s...