Page 1
PT-LB51NT P ro d u c t N u m b e r : Micro-Portable Wireless LCD Projector P ro d u c t N a m e : As of May 2007. Specifications subject to change without notice. < 1 >...
PT-LB51NT Micro-Portable Wireless LCD Projector Specifications Power supply 100–240 V AC, 50/60 Hz Power consumption 240 W (approx. 4 W in standby mode with fan stopped.) Optical system Dichroic mirror separation/prism synthesis system LCD panel Panel size 0.6˝ (15.24 mm) diagonal, micro lens array (4:3 aspect ratio)
Page 3
PT-LB51NT Micro-Portable Wireless LCD Projector Dimensions (W x H x D) 297 x 57 x 210 mm (11-11/16˝ x 2-7/32˝ x 8-1/4˝)* Weight 1.9 kg (4.2 lbs.) Operating environment Temperature 0°– 40°C (32°–104°F) Humidity 20%–80% (no condensation) Remote control unit...
Page 4
PT-LB51NT Micro-Portable Wireless LCD Projector Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. 81 (3-3/16˝) 181 (7-1/8˝) 297 (11-11/16˝) Terminals 1 Serial 2 COMPUTER (RGB) 1 input 3 COMPUTER (RGB) 2 input/COMPUTER (RGB) 1 output...
PT-LB51NT Micro-Portable Wireless LCD Projector Standard setting-up positions unit : mm (inch) ø49 (1-15/16˝) Upper edge of projected image ø43 (1-11/16˝) L: Distance to screen E: Height from the edge of screen to 93.5 (3-11/16˝) Projected image center of lens...
Page 6
PT-LB51NT Micro-Portable Wireless LCD Projector Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 100 MHz. The display resolution of this projector is 1,024 x 768 pixels.
Page 7
PT-LB51NT Micro-Portable Wireless LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, com- mands must be input through communication software, based on the format and satisfying the commu- nication conditions shown below.
PT-LB51NT Micro-Portable Wireless LCD Projector Control commands Command: <Parameter> Function Callback: <Parameter> Parameter value Power on (standby mode on) – – Power off (standby mode off) – – Volume control AVL:<pl> AVL:<pl> Input signal selection IIS:<input signal> IIS:<input signal> –...
PT-LB51NT Micro-Portable Wireless LCD Projector Parameter format Parameter format Size (Byte) Difinition <pl> 3 (1 or 2 bytes also Dicimal without signs: 0-999 (000, 001, 002...999) possible when Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) under control) Callback from the projector is 3 Byte.
Page 10
PT-LB51NT Micro-Portable Wireless LCD Projector Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. Never place objects on top of the projector while it is operating.