Statically Assign An Ip Address - D-Link dge-530t User Manual

Gigabit

Hide thumbs Also See for dge-530t:

Table of Contents

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below.

Step.1:

Windows® 2000: Click on Start > Settings > Control.Panel.>.Network.Connections.

Windows XP: Click on Start > Control.Panel.>.Network.Connections

Windows Vista®: Click on Start > Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.>.Manage.Network.

Connections

Windows® 7: Click on Start > Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.>.Change.Adapter.

Settings

Step.2:

Right-click on the Local.Area.Connection, which represents your D-Link network adapter, and select Properties.

Step.3:

Highlight Internet.Protocol.(TCP/IP) and click Properties.

Step.4:

Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network or the LAN IP address

on your router.

D-Link DGE-530T User Manual

Table of Contents