LG HBLG2504E Service Manual page 10

Installation
5. Pull each Frame curtain fully to each window sash
track, and pull the bottom window sash down behind
the Top retainer bar until it meets.
6. Attach each Frame curtain the window sash by using
screws (Type C). (See Fig. 7)
7. Slide the unit into the cabinet. (See Fig. 8)
CAUTION: For security purpose,
reinstall screws (Type A) at cabinet's
sides.
8. Cut the Foam-strip to the proper length and insert
between the upper window sash and the lower win-
dow sash. (See Fig. 9)
9. Attach the Window locking bracket with a screw
(Type C). (See Fig. 10)
10. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the cab-
inet. Push the grille in until it snaps into place. (See
Fig.11)
11. Lift the inlet grille and secure it with a screw (Type A)
through the front grille. (See Fig. 11)
12. Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
10 Room Air Conditioner
Figure 7
Screw
Power Cord
Figure 8
Figure 9
Figure 10
Figure 11
7
Screw
Foam-Strip
Window locking
bracket