Table of Contents
Advertisement
9 Complete the entire disc copying
After copy is complete the tray will open automatically, and
copy of the entire disc ends.
Memo:
The screen prompting you to insert a new disc appears
repeatedly until this unit has finished copying the number of
discs specified in Step 3. When the message appears, set
a new BD or DVD on the disc tray, select "START", and
press the [OK] button.
After copy is complete, the data copied onto the HDD will
be deleted.
Select "CANCEL" from the menu, and press the [OK]
button to cancel disc copying.
Recording Using External
Inputs
Videos on an external device that is connected to i.LINK (HDV/
DV) or video / S-video input can be recorded to the HDD.
BD, DVD can be recorded from the [VIDEO]/[S-VIDEO] or
SDI input.
Memo:
Only titles that are not copyright-protected can be imported.
1 Press the [HDD] or [BD/SD] button to select the
location to record the file
2 Press the [INPUT SELECT] button on the remote
control, and choose external input (SDI or HDV/DV
or L-1)
3 Press the [REC MODE] button and select a
recording mode
4 Press the [ R ] and [ I ] remote control buttons
together to start the recording process
Recording can also be start by pressing the [ R ] button on
this unit.
5 Operate the external device using i.LINK(HDV/
DV) or the video/S-video input or SDI input to
output the videos to be recorded
6 Press the [ o ] button on either this unit or the
remote control to display the pop-up screen,
choose "STOP" and press the [OK] button
End the recording.
Memo:
When recording images via a video camera using i.LINK
connection, recording may stopped if the video camera is
loaded with a DV tape while in the shooting mode. In this
case, remove the DV tape before recording.
Recording will be stopped if the maximum recording time
has been reached, or if there is insufficient memory in the
media.
For HDV contents, "DR" will be used to record instead of
the selected recording mode.
MAXIMUM CONTINUOUS RECORDING TIME
: 24 hours (*1)
HDD
DVD-RW : 8 hours
: 8 hours
BD-RE
*1 : Title will automatically be split into time separated by 8
hours. The dividing point will not be recorded.
For the recording modes and maximum recording time for
each disc, refer to "Recording Modes" (A page 30) .
Checking whether SDI input signals can be
recorded
1 Press the [OPTION] button on the remote
control, and select "SDI INPUT SIGNAL"
A screen showing the details of the SDI input signal appears.
2 Check to ensure that "RECORD" is displayed as
"POSSIBLE"
Recording is not possible if it is displayed as "IMPOSSIBLE".
Memo:
It takes a little moment to start recording after the button is
pressed.
Dubbing/Importing
49
Advertisement
Table of Contents
