On(G)/Standby(R) Indicator - Panasonic PT-TW231RE Operating Instructions Manual

ON(G)/STANDBY(R) indicator

The <ON(G)/STANDBY(R)> indicator informs you the status of the power. Confirm the status of the <ON(G)/
STANDBY(R)> indicator before operating the projector.
Indicator status
No illumination or flashing
Lit
RED
Flashing
Lit
GREEN
Flashing
ON(G)/STANDBY(R) indicator
The power cord is unplugged.
The power cord is plugged.
The projector is in stand-by mode, after the cooling is completed.
The projector cannot be turned on until the normal power-off processing for fan
cooling is completing and the <ON(G)/STANDBY(R)> indicator stops blinking.
The temperature inside the projector is abnormally high. And the <WARNING>
indicator also blinks in red (
cooling is completing and the <ON(G)/STANDBY(R)> indicator stops blinking.
Projecting.
The projector is in the Power management mode.
Powering ON/OFF
Status
Æ page 59). The projector cannot be turned on until
25
ENGLISH -