1100 Fan Assembly And Heat Sink Assembly - Lenovo ideapad 110-14ISK Hardware Maintenance Manual

Lenovo ideapad 110-14ISK/ideapad 110-15ISK
Hardware Maintenance Manual

1100 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order:
• "1010 Keyboard" on page 33
• "1020 Optical drive" on page 35
• "1030 Base cover" on page 36
• "1040 Battery pack" on page 40
Figure 10. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow 1 , and then remove
the screw 2.
When installing: Make sure that the fan connector is attached firmly to the
system board.
50
Step Screw (quantity)
M2.5 × 5, Phillips head, nylok-coated (1)
2
FAN TO UPPER
b
a
Color Torque
Black 3.0+/-0.3 kgf/cm