Troubleshooting - Panasonic Lumix DMC-XS1 Operating Instructions Manual

Troubleshooting

First, try out the following procedures (P116–125).
If the problem is not resolved, it may be improved by selecting [Reset]
[Setup] menu.
Battery and power source
The charging lamp has gone off but the unit has not been charged.
Or the charging lamp blinks.
•
This phenomenon occurs when charging in a location where the temperature is very high or very
low.
> Reconnect the USB connection cable (supplied) in a location where the ambient temperature
(and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF) range, and try charging
again. [If you reconnect the USB connection cable (supplied) when the unit is fully charged, the
charging lamp will turn on for approximately 15 seconds.]
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
•
The battery is exhausted. Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Auto Power Off].
Card/battery door does not close.
•
Insert the battery securely all the way in.
Others
(P12)
- 116 -
(P42) on the
(P42)