Panasonic CF-74ECBGDBM Service Manual page 30

Arranging the W-LAN L and R Cable
Pass the Cable through the notch
and lead it downward.
Lead the Cable along the surface.
Attach the Tape to each of the Cables.
(Avoid overlapping.)
Avoid overlapping of the Cables
(all the way).
Pass the Cable through the notch.
(Avoid running over the ribs.)
LCD Rear Cabnet
Attaching the LCD Damper C and LCD Damper D
1. Attach the four LCD Damper C to the upper part and lower part of the LCD Unit.
2. Attach the LCD Damper D to the upper center of the LCD Unit.
A
LCD Damper D
LCD Damper C
A: Match the LCD Damper C by LCD edge 0~2mm
W-LAN Antenna L PCB
0~1mm
Match the LCD Damper D to the center
of the LCD Unit.
Attach the Tape to hold the Cable.
Pass the Cable
through the notch
and lead it downward.
Pass the Cable between
the boss and rib.
Pass the Cable through the notch.
(Avoid running over the ribs.)
A
LCD Unit
A
9-8
W-LAN Antenna R PCB
LCD Display Side
0~1mm
LCD Damper C
LCD Rear Side