Lenovo IDEACENTRE 300s series Maintenance Manual page 35

Step 6. Remove the 2 screws that secure the optical disk drive bay to the chassis.
Step 7. Slide out the optical disk drive bay, and then lift it up.
Step 8. Disconnect the data and power cables from the rear of the optical drive.
Step 9. Remove the 2 screws that secure the optical drive to the optical drive bay
drive straight out of the front of the drive bay.
Step 10. To install the new optical drive:
a. Slide the new optical drive into the bay from the front, and then attach it to the drive bay
with the screws.
b. Connect the data and power cables to the new optical drive.
c. Slide the optical disk drive bay back, and then push it in and reattach it to the chassis with
the screws.
Step 11. Reattach the front bezel, computer cover.
2
2
1
5
1
3
4 and push the optical
.
Chapter 8 Replacing hardware
29